Hi,
*This is a follow-up question
to https://sourceforge.net/p/packetfence/mailman/message/36366809/
<https://sourceforge.net/p/packetfence/mailman/message/36366809/>*
I'm looking at setting up 802.1x for some wired switches (Unifi switches).
However, not all the clients have RADIUS (username/password) support - so
it seems I need some kind of MAC-address bypass to handle those clients.
The FreeRadius wiki mentions this one:
https://wiki.freeradius.org/guide/mac-auth#mac-auth-or-802-1x
Is there an easy way to set this up from within PacketFence?
I saw it mentioned in passing in the docs under 9.2.2 VLAN assignment (
https://packetfence.org/doc/PacketFence_Installation_Guide.html#_technical_introduction_to_out_of_band_enforcement),
but it's not clear how to actually enable this MAC authentication on
PacketFence?
Has anybody had experience setting this up with Unifi switches? What config
do you need to do on the PacketFence side?
Thanks,
Victor
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
