Hello Eran,
you need to tell to packetfence what is the new address of the device.
There is 2 solutions:
- Add a ip-helper address to packetfence on the gateway of the user vlan
(but don't remove the existing one).
- Use the dhcp remote sensor on your dhcp server
(https://github.com/inverse-inc/packetfence/blob/devel/docs/PacketFence_Installation_Guide.asciidoc#dhcp-remote-sensor)
Regards
Fabrice
Le 19-02-25 à 09 h 50, Eran Benno via PacketFence-users a écrit :
Hello
I use SNMP and role to VLAN deployment:
Upon SNMP Up trap, first a node enters a void VLAN (700), then goes to
Registration at VLAN 666 using 10.0.66.0/24 IPs.
Next WMI scan is performed and based on the OU and logged user, a VLAN
is assigned to that switch port.
For example one user's VLAN is 10.0.15.0/24.
The problem is that the "IP Address" column in the NODES tab, doesn't
refresh the IP information and continues to show the registration IP
(10.0.66.X).
Any advice how to have this information updated?
Thx in advance for any reply,
Eran.
_______________________________________________
PacketFence-users mailing list
PacketFence-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________
PacketFence-users mailing list
PacketFence-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/packetfence-users