Hello Matt,
to be able to have this information PacketFence needs to receive the
dhcp traffic of the device.
It can be done in the registration network (since packetfence is the
dhcp), via a ip helper-address config on the vlan interface, or use
dhcp-forwarder (cf doc).
Regards
Fabrice
Le 19-05-13 à 09 h 50, Matt Opificius via PacketFence-users a écrit :
Hello all!
I recently setup Packetfence 8.3.0 with the ZEN deployment. I setup
the Fingerbank API with github, and shows successfully connected. I
have a switch connected to the Packetfence, and it is working
correctly, including accounting. However, in the Node view, I see my
nodes listed, with mac address, switch ip address, switchport, but I
cannot seem to figure out how to show Device Manufacturer associated
with the Mac address. The column is there, and showing, but all the
entries are blank. I'm fairly new to Packetfence, so any advice you
can offer is much appreciated.
Thanks!
Matt
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
