Hello, If you put an auto-register they won’t the captive portal.
Thanks, Ludovic Zammit Product Support Engineer Principal Cell: +1.613.670.8432 Akamai Technologies - Inverse 145 Broadway Cambridge, MA 02142 Connect with Us: <https://community.akamai.com/> <http://blogs.akamai.com/> <https://twitter.com/akamai> <http://www.facebook.com/AkamaiTechnologies> <http://www.linkedin.com/company/akamai-technologies> <http://www.youtube.com/user/akamaitechnologies?feature=results_main> > On Jul 25, 2022, at 11:41 AM, leonida...@gmail.com wrote: > > Thanks for the reply. The problem is that in the connection profile relating > to the eth2 and eth3 interfaces, it is necessary to put as source: null and > this causes the client to receive the request for acceptance of the terms and > conditions of use of the network and then wait for the client to be > registered. > > Da: Zammit, Ludovic <luza...@akamai.com> > Inviato: lunedì 25 luglio 2022 15:11 > A: leonida...@gmail.com > Cc: packetfence-users@lists.sourceforge.net > Oggetto: Re: Configuration info > > Hello there, > > You could create different connection profile with a filter based on the > network. > > On the one that you want no registration, enable auto registration. > > Thanks, > > Ludovic Zammit > Product Support Engineer Principal > > Cell: +1.613.670.8432 > Akamai Technologies - Inverse > 145 Broadway > Cambridge, MA 02142 > Connect with Us: > <https://community.akamai.com/> <http://blogs.akamai.com/> > <https://urldefense.com/v3/__https://twitter.com/akamai__;!!GjvTz_vk!XYmmMSMkkTl0XHPeo5D8W5XVwL2GipzBBrv4Mzf7_-0HrrdAolTK3Vuu_fUZFINcNVZHFJx86ywvCWJuhg$> > > <https://urldefense.com/v3/__http://www.facebook.com/AkamaiTechnologies__;!!GjvTz_vk!XYmmMSMkkTl0XHPeo5D8W5XVwL2GipzBBrv4Mzf7_-0HrrdAolTK3Vuu_fUZFINcNVZHFJx86ywks-DMtQ$> > > <https://urldefense.com/v3/__http://www.linkedin.com/company/akamai-technologies__;!!GjvTz_vk!XYmmMSMkkTl0XHPeo5D8W5XVwL2GipzBBrv4Mzf7_-0HrrdAolTK3Vuu_fUZFINcNVZHFJx86yypYM7Wsw$> > > <https://urldefense.com/v3/__http://www.youtube.com/user/akamaitechnologies?feature=results_main__;!!GjvTz_vk!XYmmMSMkkTl0XHPeo5D8W5XVwL2GipzBBrv4Mzf7_-0HrrdAolTK3Vuu_fUZFINcNVZHFJx86yzqw2MABA$> > > > >> On Jul 25, 2022, at 4:15 AM, leonida...@gmail.com >> <mailto:leonida...@gmail.com> wrote: >> >> hi, I have Packetfence which is configured as follows: >> It has 5 network cards: eth0 of type "other" which acts as wan, and eth1, >> eth2, eth3, eth4 which are 4 LAN interfaces. >> eth4 is of type "management". >> The interfaces related to eth1, eth2 and eth3 are configured as Inline. >> On the eth2 network card I have 2 vlan which are configured as Inline. >> My requirement is that for the subnets related to the 2 vlan there are >> authentication policies through captive portal even if the source still >> needs to be established (2 wifi networks will be needed). >> Instead, the subnets relating to eth2 and eth3 must exit without any type of >> authentication, that is, pf must act as a dhcp server and gateway, but it >> must only be a broadband router. >> Instead in the subnet relative to eth1, there must be only one host >> configured with a static ip that must go out on the Internet. >> How can I configure everything? Thank you
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users