Hello, just a little update: if I set browser (in the client) to http://[ip of pf inlinel2 interface]/captive_portal everything works as expected, the client registers successfully and its status becomes registered Best Regards Marco
Il giorno gio 22 set 2022 alle ore 11:30 Marco Naimoli < [email protected]> ha scritto: > Hello Fabrice, thank you for the answer; for simplicity I started from > scratch with a new installation and configured > the internal interface as inline l2, following the guide, but I was unable > to add "portal" as additional service: when I save, > the service disappear from the input field. > DHCP on that interface works; I've configured also a connection profile > with null authentication and filter "Network" > with the network of the internal interface. Ip forwarding is > enabled, management network has a default gateway and can connect to any > site on internet; client gets ip address > from packetfence and appears on the "Nodes" section with the status of > "Unregistered", but still the registration page > doesn't appear when I try to connect to a http:// site (like > http://www.google.com). I've also tried to set > 0.0.0.0/0 on connection profile filter, but nothing changes. > I also tried to enable "Portal" on the management interface > Any hint, direction ? I've read the chapter 10 "Adding inline enforcement > to existing installation": is there other configurations > on other chapters? > Thank you > Best Regards > Marco > > > Il giorno gio 22 set 2022 alle ore 04:02 Fabrice Durand < > [email protected]> ha scritto: > >> Hello Marco, >> >> you can try the inline setup. >> One interface is configured as inline l2 and the other one as the >> management interface (facing internet) >> So when you plug something in the inline network you should be able to >> see the portal. (it´s really the first thing you need to achieve) >> Btw you will have to add more config in order to do SAML. >> >> Regards >> Fabrice >> >> >> Le mar. 20 sept. 2022 à 14:23, Marco Naimoli via PacketFence-users < >> [email protected]> a écrit : >> >>> Hi, I'm new to PacketFence; I've installed a new instance (ZEN) and >>> would like to configure a >>> (simple) captive portal with SAML authentication; >>> it should be something like >>> client --> PacketFence ---> internet >>> Is this kind of setup supported ? In the documentation I find only >>> examples that involves the configuration of a switch >>> I've tried to configure it, but the client is never redirect to the >>> Identity Provider (I've configured the passthrough with the Identity >>> Provider hostname) >>> Is there any example about a Captive portal setup other than the >>> official documentation ? >>> Thank you >>> Marco >>> _______________________________________________ >>> PacketFence-users mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/packetfence-users >>> >>
_______________________________________________ PacketFence-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/packetfence-users
