You dont mean the old catalyst switch or ?
you can send Radius Attribute for the privilege level i guess, and
define it on the switch
privilege exec level 3 copy running-config
privilege exec level 3 copy
privilege exec level 3 show inventory
privilege exec level 3 show license feature
privilege exec level 3 show license
privilege exec level 3 show system
privilege exec level 3 show snmp
privilege exec level 3 show tcp brief all
privilege exec level 3 show tcp brief
privilege exec level 3 show tcp
privilege exec level 3 show module
privilege exec level 3 show platform
privilege exec level 3 show redundancy
privilege exec level 3 show version
privilege exec all level 3 show running-config
privilege exec level 3 show configuration
privilege exec level 3 show
Am 18.10.2022 um 17:41 schrieb DeSantos, Matthew via PacketFence-users:
I’m also interested in this setup. Does anyone have a working example?
*From:* Mr.Pine via PacketFence-users
<[email protected]>
*Sent:* Saturday, October 15, 2022 1:48 AM
*To:* [email protected]
*Cc:* Mr.Pine <[email protected]>
*Subject:* [PacketFence-users] Role-Based CLI Access
*CAUTION:*This email originated from outside of Jordan's.
Hi,
I want to know if pf can manage Role-Based CLI Access for cisco
switch. for example define what commands are accepted and what
configuration information is visible for users
Any ideas?!
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
--
---------
Uli Schellhaas
Fraunhofer Institute for Secure Information Technology SIT | ATHENE -
National Research Center for Applied Cybersecurity
Department ITT (Admin / Technic)
Rheinstraße 75
64295 Darmstadt, Germany
Tel.: +49 6151 869-395
[email protected]
www.sit.fraunhofer.de
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
