Hello Community,
I’m working with ARUBA 6000 Switch with firmware 10.13.1010 and Role mapping by
Switch Role.
It seems that Switch type “Aruba::ArubaOS_CX_10_x” send Radius attribute
HP-User-Role, instead of Aruba-User-Role while “Aruba Instant” type send the
good one.
However, Aruba::ArubaOS_CX_10_x “Disconnect” work while it doesn’t with Aruba
Instant type ☹.
Any idea where to change this attribute name in the model of
Aruba::ArubaOS_CX_10_x ?
With Aruba::ArubaOS_CX_10_x, no mapping occurs, but Disconnect work (if role
previously forced):
Request Time
RADIUS Request
CHAP-Challenge = "**",
CHAP-Password = "**",
Called-Station-Id = "**",
Calling-Station-Id = "**",
Event-Timestamp = "May 7 2024 15:00:48 CEST",
FreeRADIUS-Client-IP-Address = "10.130.10.203",
Message-Authenticator = "**",
NAS-IP-Address = "**",
NAS-Identifier = "**",
NAS-Port = "3",
NAS-Port-Id = "1\/1\/3",
NAS-Port-Type = "Ethernet",
PacketFence-KeyBalanced = "**",
PacketFence-Radius-Ip = "**",
Realm = "null",
Service-Type = "Call-Check",
Stripped-User-Name = "**",
User-Name = "**",
User-Password = "******"
RADIUS Reply
HP-User-Role = "UEZ-VOICE",
REST-HTTP-Status-Code = "200"
# show port-access client
Port Access Clients
RADIUS overridden user roles are suffixed with '*'
Flags: Onboarding-Method|Mode|Device-Type|Status
Onboarding-Method: 1x 802.1X, ma MAC-Auth, ps Port-Security, dp Device-Profile
Mode: c Client-Mode, d Device-Mode, m Multi-Domain
Device-Type: d Data, v Voice
Status: s Success, f Failed, p In-Progress, d Role-Download-Failed
--------------------------------------------------------------------------------------------------------------
Port Client-Name IPv4-Address User-Role
VLAN Flags
--------------------------------------------------------------------------------------------------------------
1/1/3 80:5e:0c:d9:b4:64
(u)1 ma|c|-|s
Disconnect (works):
Request Time
RADIUS Request
NAS-IP-Address = ** "
User-Name = ** "
NAS-Port = "
Calling-Station-Id = **-**-**-**-**-**",
RADIUS Reply
Code = Disconnect-ACK "
Acct-Terminate-Cause = Admin-Reset
Using switch type “Aruba Instant” User-role is correctly mapped, but Disconnect
and CoA doesn’t work :
Request Time
RADIUS Request
CHAP-Challenge = "**",
CHAP-Password = "**",
Called-Station-Id = "**",
Calling-Station-Id = "**",
Event-Timestamp = "May 7 2024 15:25:34 CEST",
FreeRADIUS-Client-IP-Address = "**",
Message-Authenticator = "**",
NAS-IP-Address = "**",
NAS-Identifier = "**",
NAS-Port = "3",
NAS-Port-Id = "1\/1\/3",
NAS-Port-Type = "Ethernet",
PacketFence-KeyBalanced = "**",
PacketFence-Radius-Ip = "**",
Realm = "null",
Service-Type = "Call-Check",
Stripped-User-Name = "**",
User-Name = "**",
User-Password = "******"
RADIUS Reply
Aruba-User-Role = "UEZ-VOICE",
REST-HTTP-Status-Code = "200"
# show port-access client
Port Access Clients
RADIUS overridden user roles are suffixed with '*'
Flags: Onboarding-Method|Mode|Device-Type|Status
Onboarding-Method: 1x 802.1X, ma MAC-Auth, ps Port-Security, dp Device-Profile
Mode: c Client-Mode, d Device-Mode, m Multi-Domain
Device-Type: d Data, v Voice
Status: s Success, f Failed, p In-Progress, d Role-Download-Failed
--------------------------------------------------------------------------------------------------------------
Port Client-Name IPv4-Address User-Role
VLAN Flags
--------------------------------------------------------------------------------------------------------------
1/1/3 80:5e:0c:d9:b4:64 UEZ-VOICE
(t)25 ma|c|-|s
Disconnect (doesn’t work):
Request Time
RADIUS Request
Calling-Station-Id = ** "
NAS-IP-Address = ** "
User-Name = **",
RADIUS Reply
Code = Disconnect-NAK "
Error-Cause = Invalid-Request
For any references:
# show version
-----------------------------------------------------------------------------
ArubaOS-CX
(c) Copyright 2017-2024 Hewlett Packard Enterprise Development LP
-----------------------------------------------------------------------------
Version : PL.10.13.1010
Build Date : 2024-04-09 00:21:30 UTC
Build ID : ArubaOS-CX:PL.10.13.1010:ef2109377880:202404090010
Build SHA : ef21093778805e954ec130b0939d34927bb7ba19
Hot Patches :
Active Image : primary
Service OS Version : PL.01.14.0002
BIOS Version : PL.02.0002
# show system inventory
Type Location Product Description
Serial Hardware
Number
Number Version
-------------------- -------- ----------------
-------------------------------------------------- ---------------- -----------
Chassis 1 R8N87A 6000 24G Class4 PoE 4SFP 370W
Switch ********** 3
Thank you !
Maxime Kieffer
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users
