Hello, after upgrading from Packetfence 12.2 to 14.0 using the Upgrade-Guide: <https://www.packetfence.org/doc/PacketFence_Upgrade_Guide.html#_import_the_ database_on_debian_12> PacketFence Upgrade Guide all '/' are displayed as '\/'. This occurs in the RADIUS Audit log e.g. in the column "NAS Port ID" - "0\/10". Entries from the old System which where back-upped, exported and imported are shown correctly.
The functionality of the system doesn't seem to be affected. Example RADIUS Request: Request Time RADIUS Request Called-Station-Id = "XX:XX:XX:XX:XX:XX", Calling-Station-Id = "XX:XX:XX:XX:XX:XX", EAP-Message = "0x024300061a03", EAP-Type = "MSCHAPv2", Event-Timestamp = "Feb 12 2025 14:42:52 CET", Fabric-Attach-Client-PSK = "0", Fabric-Attach-Switch-Mode = "0", Framed-MTU = "1490", FreeRADIUS-Proxied-To = "127.0.0.1", NAS-IP-Address = "XXX.XXX.XXX.XXX", NAS-Port = "10", NAS-Port-Id = "0\/10", NAS-Port-Type = "Ethernet", PacketFence-Domain = "domain", PacketFence-KeyBalanced = "XXXXXXXXXXXXXXXXXXXXXXXXXX", PacketFence-NTLM-Auth-Host = "XXX.XXX.XXX.XXX", PacketFence-NTLM-Auth-Port = "5000", PacketFence-Outer-User = "host\/MyPC.domain.local, PacketFence-Radius-Ip = "XXX.XXX.XXX.XXX", Realm = "domain.local", Service-Type = "Framed-User", State = "0x827a592a833943b579c59958db14c642", User-Name = "host\/MyPC.domain.local", User-Password = "******" RADIUS Reply EAP-Message = "0x03430004", MS-MPPE-Encryption-Policy = "Encryption-Required", MS-MPPE-Encryption-Types = "4", MS-MPPE-Recv-Key = "XXXXXXXXXXXXXXXXXXXX", MS-MPPE-Send-Key = " XXXXXXXXXXXXXXXXXXXX ", Message-Authenticator = "0x00000000000000000000000000000000", REST-HTTP-Status-Code = "200", Tunnel-Medium-Type = "IEEE-802", Tunnel-Private-Group-Id = "XXX", Tunnel-Type = "VLAN", User-Name = "host\/MyPC.domain.local" Thank you and best regards Andreas
_______________________________________________ PacketFence-users mailing list PacketFence-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/packetfence-users
