I'm using a Cisco 5500 series WLC to run our guest wireless at multiple 
locations using PF's captive portal.  We've gotten it working fine, but I'm 
looking to deploy slightly different captive portals based on location (e.g. 
some need just a click-through, but some need password of the day or 
email-based registration).  We use the same guest SSID at all locations.

I'd like to be able to filter the Connection Profiles based on either incoming 
VLAN or WLAN ID.  The VLAN always appears to report as 0, even though the 
RADIUS attribute "Tunnel-Private-Group-Id" is set correctly (e.g. VLAN 30) in 
the Access-Request packet.  I cannot figure out how to reference either this 
RADIUS attribute or the "Airespace-Wlan-Id" RADIUS attribute in the Connection 
Profiles advanced filter, only the "radius_request.NAS-Identifier" and 
similarly exposed attributes.  There is one called 
"radius_request.Packetfence-Raw" but there doesn't seem to be any documentation 
describing what this is or how it should be used.

Could anyone point me in the correct direction for how I could access these 
RADIUS attributes in the Connection Profile filters?

Kevin T. Berstene
Network Administrator
CREC Technology Services
CREC (Capitol Region Education Council)
111 Charter Oak Avenue, Hartford, CT 06106

This transmission, including any HIPAA-related attachments or information, is 
for the sole use of the intended recipient(s) and may contain privileged and 
confidential information, including information protected by law. If you are 
NOT the intended recipient, your further review, use, or disclosure of this 
transmission is prohibited. Please reply to the sender or send a copy of this 
email to [email protected] to notify CREC that you are not the intended 
recipient. Thank you.
_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to