Hi team,

It has been quite a while since I touched PacketFence and now I need to get
the newer version of it run together with Unifi

Following this document:

 

https://packetfence.org/doc/PacketFence_Network_Devices_Configuration_Guide.
html

 

On the page where it describes what should be done for Unifi controller:

 

PacketFence side
<https://packetfence.org/doc/PacketFence_Network_Devices_Configuration_Guide
.html#_packetfence_side_3> 

You have two choices to define the APs in PacketFence, by ip address (or
range) or by MAC addresses.

By IP address:

If you decide to define the AP by ip then you will need to define the
controller as a switch and define the Controller IP and Webservices
information (Transport/Username/Password) in his configuration.

Then once done, restart pfcron service and run that to fill the PacketFence
cache:

 

/usr/local/pf/bin/pfcmd pfcron ubiquiti_ap_mac_to_ip

And verify that you have an entry for each AP

 

/usr/local/pf/bin/pfcmd cache switch_distributed list

 

This last command doesn't produce any results.

 

Question 1: how would I define port 8443 in the WebServer transport settings
if it is required to login to Unifi controller Web GUI?

 



 

Question 2: Where would I find logs for the attempt to discover AP by IP
addresses ?

 

Eugene

_______________________________________________
PacketFence-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/packetfence-users

Reply via email to