thanx sir,
i gone to that site but it contains the same lite version.so from
where will i get the r6 lite version
-----Original Message-----
From: Jun-Kiat Lam <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date: Friday, November 12, 1999 11:56 PM
Subject: Re: problem in the size of the segment.
>You may want to use the latest version of Lite from
>www.metrowerks.com/pda/palm. The R6 version of Lite does not have the same
>limitation as the R5 version. The main limitation of R6 Lite is that the
>runtime is set up to display a notice that your app was created using Lite
>whenever you run it. Beyond that, it should allow you to do what you need.
>
>Jun-Kiat Lam
>Metrowerks Technical Support
>
>----- Original Message -----
>From: Gaurav Palvia <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Friday, November 12, 1999 11:55 AM
>Subject: Re: problem in the size of the segment.
>
>
>> thanx Eric
>> i m using the CW 5 lite version.so u say its got 16k limit.thats fine
>> but how many number of segments it can support.
>> as whenevr i create the 3rd segment it gives me error saying
>> that lite version doesn;t support more then 2 seg.
>> so is there no way i can use my 55k code.
>>
>>
>> -----Original Message-----
>> From: Eric Cloninger <[EMAIL PROTECTED]>
>> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
>> Date: Friday, November 12, 1999 9:35 PM
>> Subject: RE: problem in the size of the segment.
>>
>>
>> >If you are using the Lite version of the tools, which is what that
>message
>> >indicates, then there is a 16K limit on the size of the segment. The
>> >commercial tools will let you create segments up to the normal limit,
>which
>> >is 64K (more or less, you're mileage may vary).
>> >
>> >If you have the commercial tools, then it looks like you may have the
>Lite
>> >version of the post linker somehow. Did you start out with the Lite
>tools
>> >and upgrade to the commercial tools?
>> >
>> >-E
>> >
>> >> -----Original Message-----
>> >> From: Gaurav Palvia [mailto:[EMAIL PROTECTED]]
>> >> Sent: Friday, November 12, 1999 5:21 AM
>> >> To: palm-dev-forum
>> >> Subject: problem in the size of the segment.
>> >>
>> >>
>> >> how much code & data can reside in a single segment.
>> >> i have read that it is 32k but i have created two segments.
>> >> for my app and it si giving me the linker error that "
>> >> ouput size limitation exceeded for evaluation license in resource
>code#1
>> >>
>> >> i have a total of 55k code and approx 4k of data which
>> >> i have arranged as foloows
>> >> code
>> >> data
>> >> precompiled headers 27k 667
>> >> segment2 27k 3k
>> >>
>> >> every time it is giving me the above error for either resource code#1
>> >> or resource code#2.
>> >>
>> >> i have tried many combinations by shuffling the files in these 2
>segments
>> >> but nothing seem to work. i have also tried to create one more
>> >> segment for
>> >> which it says that evaluation version doesn't support
>> >> 3rd segment..please help me.
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>> >
>>
>>
>
>
