> Ok, I'm successfully using the Palm OS 3.x grayscale API (yes I know this
> is only a 3.x-ism and that it might break, etc etc, but bear with me
> please). It works just fine in the emulator and on my IIIx, but...
>
> The contrast on the IIIx in gray mode is just horrible, forcing me to
> adjust it "up" with the wheel. When I do this, it looks pretty good, but
> then of course when my app exits, and resets the system to normal mode,
> the screen is almost unreadably dark due to the contrast adjustment I had
> to do...
>
> A friend's IIIx behaves the same way, so I assume this is not just an
> issue with mine. I don't have a V to play with to see if the same issue
> happens there or not, but I suspect it's the advanced screen used in IIIx,
> IIIe, V, etc...because on my Pro when I used other programs that used the
> direct write-to-hardware method, all was fine contrast wise.
>
> So the question is this. Is there something I can do about this annoying
> contrast issue? Is there an API to set it? I know I can bring up the
> slider on the V, but I don't think there's an API to set it in OS 3.x in
> general, correct?
adjust the grayscale pallete values yourself.. just beware tho,
here is a different approach to do this between the EZ and
standard processor..
az.
--
Aaron Ardiri
Lecturer http://www.hig.se/~ardiri/
University-College i G�vle mailto:[EMAIL PROTECTED]
SE 801 76 G�vle SWEDEN
Tel: +46 26 64 87 38 Fax: +46 26 64 87 88
Mob: +46 70 656 1143 A/H: +46 26 10 16 11
