Error #773 is a serial timeout error. Poser and the ROM Transfer application
were unable to hook-up with each other for some reason. I suggest:
a) Making sure you can HotSync between your PC and your Palm device. This tells
you that there is a viable connection between the two, and that you know what
port your cradle is on.
b) After doing that, disabling HotSync (I usually go to the setup menu and tell
it to use the wrong COM port, but you might try exitting it altogether) and then
trying the ROM download sequence.
That always works for me. And I've got 3 computers, 5 cradles, and 8 Palm
devices to sort out...
-- Keith
[EMAIL PROTECTED] on 12/23/99 08:19:04 AM
Please respond to [EMAIL PROTECTED]
Sent by: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
cc: (Keith Rollin/HQ/3Com)
Subject: Re: Getting started
Thanks. I just tried with 9600bps (yeah with POSE) and I still get error #773.
Any ideas?
Prakash
"Roger Chaplin" <[EMAIL PROTECTED]> on 12/23/99 11:13:11 AM
Please respond to [EMAIL PROTECTED]
To: palm-dev-forum
cc: (bcc: Prakash Mahesh/BVT/IDX1)
Subject: Re: Getting started
Body:
[EMAIL PROTECTED] wrote:
> 1. I am having problems downloading my ROM image from my Palm V. I am getting
an
> Error #773. I am using Com2 port and 115,200 bps speed. I get this error in
the
> ROM Transfer program on the palm.
>
> 2. The GCC for Win32 won't work on WinNT (copilot.exe won't run). Any ideas?
You should go to the Palm Devzone (http://www.palm.com/devzone/) and
download the latest Palm OS Emulator (POSE). It's far better than the
old copilot, and runs on NT. It also can upload the ROM image from your
Palm V. If you get errors during the transfer, try again using a lower
speed.
--
Roger Chaplin
<[EMAIL PROTECTED]>
