De : "Heather Tufts" <[EMAIL PROTECTED]> > I regularly use Windows NT SP 6 (previously 5) and CW 6 with 3.5 SDK, Update > 1, and 1.6.3b12 debugger and POSE 3.0a5, 3.0a6, and 2.1d29 without issue. I > also use MacOS 9.0.4 (previously 9.0) and CW 6 with 3.5 SDK, Update 1, and > 1.6.3b12 debugger with POSE 3.0a5 and 3.0a6 without problems. As far as > other people here at MW, another Tech Support person uses Win98 SE with the > same software (generally POSE 3.0a6) and an engineer uses Win2000 SP1 > (generally with POSE 3.0a7) and they don't have any connection issues with > 3.0a5 through 3.0a7.
Thanks ! However, it doesn't help very much, since I tried the same configuration and still experienced connection problems between CW and POSE. I suspect very much that those problems are kind of hardware-sensitive. That is, as there are probably timing questions involved, it might be related to things like processor type and speed, memory size, and OS. So, could you tell what kind of hardware are you using ? Also, I suggest you try CW 6 + update 1 + latest plug-in + POSE 3.0a7 on such "low end" configuration as mine (Celeron 300A, 64Mb, Win98SE). This might help you finding out what's wrong in the protocol and/or implementation of the communication between the debugger plug-in and POSE. When it breaks, in 90% cases the plug-in can't connect any more to POSE and the only cure is usually to close and restart CW IDE : in my opinion, this demonstrates that there is something wrong. -- Denis Faivre - [EMAIL PROTECTED] -- Ablivio - http://www.ablivio.com -- For information on using the ACCESS Developer Forums, or to unsubscribe, please see http://www.access-company.com/developers/forums/
