<[EMAIL PROTECTED]> wrote in message news:42517@palm-dev-forum...
> If I set my IR port speed to 115Kbps and beam to another Palm, it takes
just
> as long as when I have my IR port speed set to 56Kbps.
What protocol are you using? IrCOMM, IrOBEX, IrLMP, etc? How are you setting
the speed to 115Kbps? I've used 115Kbps successfully with IrLMP. I don't
know of any way adjust the baud rate for IrOBEX. I think there is a way for
IrCOMM, but I don't know it off the top of my head.
> Does the
> Palm really go 115K or does the overhead of communication give me an
apparent
> speed or 56K?
The overhead varies depending on the protocol. The fancier protocols have
more overhead, but they provide better service too.
> Or, is the setting in the communications menu irrelevant to
> beaming?
I'm not sure which menu you're referring to.
BTW, comm-dev-forum would be more appropriate for this topic.
--
Danny Epstein
OS Engineer, Palm Inc.
--
For information on using the Palm Developer Forums, or to unsubscribe, please see
http://www.palmos.com/dev/tech/support/forums/
