Dave, Thanks. The Symbol SDK docs were exactly what I needed. I used these docs when I wrote the scanning code. Must have just forgotten about the included printer stuff.
JCC "Dave Lippincott" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > Read about the serial manager in the SDK docs. There are examples in > various places on the web you can search for. There is an example in the > PalmKnowledge Base titled ' Polling serial data with event loop and Alarm'. > It shows using the serial Srm calls to collect serial data. > There are several good books out that detail serial communications. I've > used the 'Palm Programming: The Developer's Guide' 2nd edition. It has good > examples. > Search the archives for past posts. You'll find tons of tips. > Also, as a bonus, the Symbol SDK has printer interface routines. Check > their docs for details. > > ----- Original Message ----- > From: "John C. Christensen" <[EMAIL PROTECTED]> > Newsgroups: palm-dev-forum > To: "Palm Developer Forum" <[EMAIL PROTECTED]> > Sent: Thursday, October 23, 2003 2:45 AM > Subject: Serial newby > > > > I need to connect Symbol SPT1800s to a barcode printer (likely a Zebra > 2824) > > via a serial cable. I would like to find some example serial manager code > > (CodeWarrior) to get me started. Can anyone help? > > > > Thanks, > > > > John C. Christensen > > > > > > > > -- > > For information on using the Palm Developer Forums, or to unsubscribe, > please see http://www.palmos.com/dev/support/forums/ > > > > -- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/