I've followed the instructions below with some success. Unfortunately, the first time my treo turns off after connection to CW, the connection is lost. This means that attempts by the treo to connect (at a debug point) or attempts by the ide to download an app result in CW hanging.
I've gone to my USB settings and told the laptop not to turn off power to the ports ever. Any other ideas?
- It makes it particularly hard (impossible) to debug any events related to turning on!
Sounds like you need to try serial debugging -- the USB chip on the device doesn't stay active when the device sleeps, and there's no way to change that, AFAIK. A serial connection will also go dead, but as long as CW doesn't try to send a command while the device is asleep, it should be able to reestablish a connection.
-- Ben Combee, Senior Software Engineer, palmOne, Inc. "Combee on Palm OS" weblog: http://palmos.combee.net/ Developer Forum Archives: http://news.palmos.com/read/all_forums/
-- For information on using the Palm Developer Forums, or to unsubscribe, please see http://www.palmos.com/dev/support/forums/
