On Tue, 2009-12-29 at 13:15 +1000, Bones wrote: > On Mon, 2009-12-28 at 18:53 -0800, Paul McCool wrote: > > When I start it up, all of the peripherals do what they normally do, but I > > get a NO VIDEO INPUT DETECTED on the monitor. It beeps/chirps lights up > > normally, but without the monitor display. > > > > Paul M. > > > > > OK if the POST beep is normal and all else including hard drive light is > flashing normally, that shows hard drive read, and you've reseated and > cleaned the vid card slot and RAM then the problem sounds like the PCIe > slot for that card may have expired...not normal but I have seen it. > Check BIOS battery as well....it needs to be at LEAST 3v, normally 3.2V, > if not then it can sometimes stop the PC from POSTing. > > Bones > > Also you may have a dodgy RAM stick..the beep should be long if it's shot but try with one out at a time if you have more than one, also try one at a time in different slots to see if the one of the RAM slots is cactus.
Bones -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. -- You received this message because you are subscribed to the Google Groups "Papermodels II" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/papermodels?hl=en.
