Thanks Ken,
But what I was searching for was the configuration options, as I
couldn't find any information on how to launch the server in case of
multiple displays.
Can I specify display numbers in machinefiles?
It would be great if I can get any pointers.
-Om
Moreland, Kenneth wrote:
That’s basically what Utkarsh meant by needing to set up the
environment correctly. Typically the GPU used is determined by the
DISPLAY environment variable. “:0” is typically the first GPU and “:1”
is typically the second GPU. You need to launch pvserver such that
node 0 gets :0 for the DISPLAY env variable (or –display flag) and
node 1 gets :1.
-Ken
On 4/20/09 8:39 AM, "Omkaranathan" <omkaranat...@darshan3d.com> wrote:
Hi Utkarsh,
Thanks for the response.
The suggested command line creates two seperate processes and
devides the data properly, but I'm getting both the tiles in the
same display(connected to first GPU).
-Om
Utkarsh Ayachit wrote:
Yes, just run pvserver as follows:
mpirun -np 2 pvserver -tdx=2
Of course, you'll have to build your own MPI enabled ParaView (you
cannot use the binaries provided by on www.paraview.org
<http://www.paraview.org> ). You'll have
to ensure that the environment is set up correctly so that each
pvserver processes gets the right display etc.
Utkarsh
On Mon, Apr 20, 2009 at 8:08 AM, Omkaranathan
<omkaranat...@darshan3d.com>
<mailto:omkaranat...@darshan3d.com> wrote:
Hi,
Is it possible to achieve tiled display using a single
dual-gpu machine
which can drive 4 displays? I have read that the number of
servers should
atleast be equal to number of tiles.
Can paraview be configued to have atleast a 2x1 tiled
display with 2 GPUs?
Thanks
Omkaranathan
_______________________________________________
Powered by www.kitware.com <http://www.kitware.com>
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview
**** Kenneth Moreland
*** Sandia National Laboratories
***********
*** *** *** email: kmo...@sandia.gov
** *** ** phone: (505) 844-8919
*** web: http://www.cs.unm.edu/~kmorel <http://www.cs.unm.edu/%7Ekmorel>
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview
