Hi remy: Your suggestion has been applied and the changes were committed to the CVS head.
Thanks. -Zhanping On Fri, Mar 5, 2010 at 9:12 PM, Zhanping Liu <zhanping....@kitware.com>wrote: > da; > > I will fix it. > > -Zhanping > > On Fri, Mar 5, 2010 at 7:28 PM, da <remywe...@gmail.com> wrote: > >> Hi folks. >> >> I ran into this problem recently with STRANDID/TIMESOLUTION as well. For >> my files, they are automatically added even though there is no data for >> them. >> >> STRANDID=0, SOLUTIONTIME=0 >> >> A simple solution for me was to just eat up the token for them... >> >> if ( tok == "STRANDID" ) >> { >> vtkErrorMacro( << this->FileName << "; Tecplot zone record >> parameter " >> << "'STRANDID' is currently unsupported." ); >> *** this->Internal->GetNextToken();* >> } >> else >> if ( tok == "SOLUTIONTIME" ) >> { >> vtkErrorMacro( << this->FileName << "; Tecplot zone record >> parameter " >> << "'SOLUTIONTIME' is currently unsupported." ); >> *** this->Internal->GetNextToken();* >> } >> >> and it'll just continue as if nothing was going on. Otherwise, the loop >> exits the zone area and gives you a ton of errors. >> >> >> On Wed, Nov 25, 2009 at 10:12 AM, Zhanping Liu >> <zhanping....@kitware.com>wrote: >> >>> Hi Fred: >>> >>> Is that convenient for me to have a copy of the whole tecplot file >>> (including the actual zone data in addition to the zone title)? Then I will >>> be glad to check the problem by removing the time-series tokens (STRANDID >>> and TIMESOLUTION) first. There seem to be other tokens indicating some >>> functionalities that the current simplified reader does not support yet. >>> >>> Thanks. >>> >>> -Zhanping >>> >>> On Wed, Nov 25, 2009 at 6:47 AM, Fred Fred <stan1...@hotmail.fr>wrote: >>> >>>> >>>> Actually this is not a time varying series but there are several zones: >>>> >>>> >>>> ZONE T="domain1" >>>> STRANDID=0, SOLUTIONTIME=0 >>>> I=43, J=45, K=5, ZONETYPE=Ordered >>>> DATAPACKING=BLOCK >>>> VARLOCATION=([4-12]=CELLCENTERED) >>>> AUXDATA CGNS.CGNSBase_t="Base#1" >>>> AUXDATA CGNS.Zone_t="domain1" >>>> DT=(DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE >>>> DOUBLE DOUBLE DOUBLE ) >>>> 4.352440754E-02 4.352440754E-02 4.352440754E-02 4.352440754E-02 >>>> 4.352440754E-02 >>>> [...] >>>> 1.710705371E+01 1.603499243E+01 >>>> ZONE T="domain3" >>>> STRANDID=0, SOLUTIONTIME=0 >>>> I=49, J=89, K=9, ZONETYPE=Ordered >>>> >>>> DATAPACKING=BLOCK >>>> VARLOCATION=([4-12]=CELLCENTERED) >>>> AUXDATA CGNS.CGNSBase_t="Base#1" >>>> AUXDATA CGNS.Zone_t="domain3" >>>> DT=(DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE DOUBLE >>>> DOUBLE DOUBLE DOUBLE ) >>>> -1.454322089E-02 -1.453761256E-02 -1.452607960E-02 -1.450552743E-02 >>>> -1.447481920E-02 >>>> [...] >>>> >>>> and always the same time value : STRANDID=0, SOLUTIONTIME=0 >>>> I tried to withdraw this line everywhere but I get another error: >>>> >>>> >>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714 >>>> vtkTecplotReader (0x25249ca0): >>>> /Users/wifridlefer/Data/TM/Jalon2/CAS_MT2.dat: The record type >>>> -1.988960529E-02 found in the file is unknown. >>>> >>>> Any idea? >>>> >>>> >>>> ------------------------------ >>>> Date: Fri, 20 Nov 2009 11:55:55 -0500 >>>> >>>> Subject: Re: [Paraview] Tecplot reader error >>>> From: zhanping....@kitware.com >>>> To: agaglia...@ara.co.uk >>>> CC: stan1...@hotmail.fr; paraview@paraview.org >>>> >>>> >>>> Adriano: >>>> >>>> You are correct. >>>> >>>> This ad-hoc way works by means of vtkFileSeriesReader.cxx. >>>> >>>> Thanks. >>>> >>>> -Zhanping >>>> >>>> On Fri, Nov 20, 2009 at 11:48 AM, Adriano Gagliardi < >>>> agaglia...@ara.co.uk> wrote: >>>> >>>> Zhanping, >>>> >>>> This method will not allow you to use any of the time-dependent filters, >>>> right (like FFT)? >>>> >>>> Adriano >>>> >>>> =================================== >>>> >>>> Adriano Gagliardi MEng PhD >>>> Project Scientist >>>> Computational Aerodynamics >>>> Aircraft Research Association Ltd. >>>> Manton Lane >>>> Bedford >>>> >>>> Tel: 01234 32 4644 >>>> E-mail: agaglia...@ara.co.uk >>>> Url: www.ara.co.uk >>>> >>>> >>>> ------------------------------ >>>> *From:* paraview-boun...@paraview.org [mailto: >>>> paraview-boun...@paraview.org] *On Behalf Of *Zhanping Liu >>>> *Sent:* 20 November 2009 16:35 >>>> *To:* Fred Fred >>>> *Cc:* paraview@paraview.org >>>> *Subject:* Re: [Paraview] Tecplot reader error >>>> >>>> Fred: >>>> >>>> The problem was actually caused by "STRANDID=0, SOLUTIONTIME=0". >>>> Currently the Tecplot reader, a simplified version, does not support >>>> loading >>>> time series data. If you really want load multiple time steps of data, you >>>> need to remove these two tokens from the zone header(s). And you need put >>>> each time step as an individual file, e.g., file000.tec, file001.tec, ... >>>> and et al. Then you can select all of them by means of 'file*.tec' when >>>> opening the file dialog. In this way, you will still be able to view the >>>> dataset at multiple steps. >>>> >>>> Sorry for the lack of time series data support and we are considering >>>> if we need to add it. >>>> >>>> Thanks. >>>> >>>> -Zhanping >>>> >>>> On Fri, Nov 20, 2009 at 10:08 AM, Zhanping Liu < >>>> zhanping....@kitware.com> wrote: >>>> >>>> Fred: >>>> >>>> I will fix it. >>>> >>>> Thanks. >>>> >>>> -Zhanping >>>> >>>> On Fri, Nov 20, 2009 at 9:13 AM, Fred Fred <stan1...@hotmail.fr>wrote: >>>> >>>> I am not a tecplot file format specialist but I need to read such >>>> files provided by other people. >>>> The header of my file is as follow: >>>> >>>> TITLE = "Translation of CGNS file elsAoutput.cgns" >>>> VARIABLES = "CoordinateX" >>>> "CoordinateY" >>>> "CoordinateZ" >>>> "TurbulentDissipation" >>>> "Density" >>>> "TurbulentDistance" >>>> "TurbulentDistanceIndex" >>>> "EnergyStagnationDensity" >>>> "MomentumZ" >>>> "MomentumY" >>>> "MomentumX" >>>> "TurbulentEnergyKineticDensity" >>>> DATASETAUXDATA Common.DensityVar="5" >>>> DATASETAUXDATA Common.StagnationEnergyVar="8" >>>> DATASETAUXDATA Common.TurbulentDissipationRateVar="4" >>>> DATASETAUXDATA Common.UVar="11" >>>> DATASETAUXDATA Common.VectorVarsAreVelocity="FALSE" >>>> DATASETAUXDATA Common.VVar="10" >>>> DATASETAUXDATA Common.WVar="9" >>>> ZONE T="domain1" >>>> STRANDID=0, SOLUTIONTIME=0 >>>> I=43, J=45, K=5, ZONETYPE=Ordered >>>> DATAPACKING=BLOCK >>>> VARLOCATION=([4-12]=CELLCENTERED) >>>> AUXDATA CGNS.CGNSBase_t="Base#1" >>>> AUXDATA CGNS.Zone_t="domain1" >>>> >>>> I get this errors: >>>> >>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714 >>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type >>>> DATAPACKING found in the file is unknown. >>>> >>>> >>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714 >>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type BLOCK >>>> found in the file is unknown. >>>> >>>> >>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714 >>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type >>>> VARLOCATION found in the file is unknown. >>>> >>>> >>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714 >>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type [4-12] >>>> found in the file is unknown. >>>> >>>> >>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714 >>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type >>>> CELLCENTERED found in the file is unknown. >>>> >>>> >>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714 >>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type >>>> AUXDATA found in the file is unknown. >>>> >>>> >>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714 >>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type >>>> CGNS.CGNSBASE_T found in the file is unknown. >>>> >>>> >>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714 >>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type Base#1 >>>> found in the file is unknown. >>>> >>>> >>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714 >>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type >>>> AUXDATA found in the file is unknown. >>>> >>>> >>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714 >>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type >>>> CGNS.ZONE_T found in the file is unknown. >>>> >>>> >>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714 >>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type >>>> domain1 found in the file is unknown. >>>> >>>> >>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714 >>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type DT >>>> found in the file is unknown. >>>> >>>> >>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714 >>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type DOUBLE >>>> found in the file is unknown. >>>> >>>> >>>> ERROR: In /usr/local/ParaView3/VTK/IO/vtkTecplotReader.cxx, line 1714 >>>> vtkTecplotReader (0x25198950): /Data/dataset.dat: The record type DOUBLE >>>> found in the file is unknown. >>>> >>>> So it seems that the line "DATAPACKING=BLOCK" raises problem. >>>> Any help? >>>> >>>> >>>> ------------------------------ >>>> Gagnez au cadeau par jour avec Hotmail Magic Moment ! Cliquez ici >>>> !<http://www.hotmailmagicmoment.com/> >>>> >>>> _______________________________________________ >>>> Powered by www.kitware.com >>>> >>>> Visit other Kitware open-source projects at >>>> http://www.kitware.com/opensource/opensource.html >>>> >>>> Please keep messages on-topic and check the ParaView Wiki at: >>>> http://paraview.org/Wiki/ParaView >>>> >>>> Follow this link to subscribe/unsubscribe: >>>> http://www.paraview.org/mailman/listinfo/paraview >>>> >>>> >>>> >>>> >>>> -- >>>> Zhanping Liu, PhD >>>> Kitware, Inc. >>>> 28 Corporate Drive >>>> Clifton Park, NY 12065-8662 >>>> Phone: 518-371-3971 x 138 >>>> http://www.zhanpingliu.org >>>> >>>> >>>> >>>> >>>> -- >>>> Zhanping Liu, PhD >>>> Kitware, Inc. >>>> 28 Corporate Drive >>>> Clifton Park, NY 12065-8662 >>>> Phone: 518-371-3971 x 138 >>>> http://www.zhanpingliu.org >>>> --------------------------- >>>> This email contains information that is private and confidential and is >>>> intended only for the addressee. If you are not the intended recipient >>>> please delete it and notify us immediately by e-mailing the sender. >>>> Note: All email sent to or from this address may be accessed by someone >>>> other than the recipient, for system management and security reasons. >>>> Aircraft Research Association Ltd. Registered in England, Registration >>>> No 503668 Registered Office: Manton Lane, Bedford MK41 7PF England VAT No >>>> GB >>>> 196351245 >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> -- >>>> Zhanping Liu, PhD >>>> Kitware, Inc. >>>> 28 Corporate Drive >>>> Clifton Park, NY 12065-8662 >>>> Phone: 518-371-3971 x 138 >>>> http://www.zhanpingliu.org >>>> >>>> ------------------------------ >>>> Gagnez au cadeau par jour avec Hotmail Magic Moment ! Cliquez ici >>>> !<http://www.hotmailmagicmoment.com/> >>>> >>> >>> >>> >>> -- >>> Zhanping Liu, PhD >>> Kitware, Inc. >>> 28 Corporate Drive >>> Clifton Park, NY 12065-8662 >>> Phone: 518-371-3971 x 138 >>> http://www.zhanpingliu.org >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://www.paraview.org/mailman/listinfo/paraview >>> >>> >> > > > -- > Zhanping Liu, PhD > Kitware, Inc. > 28 Corporate Drive > Clifton Park, NY 12065-8662 > Phone: 518-371-3971 x 138 > http://www.zhanpingliu.org > -- Zhanping Liu, PhD Kitware, Inc. 28 Corporate Drive Clifton Park, NY 12065-8662 Phone: 518-371-3971 x 138 http://www.zhanpingliu.org
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview