Thanks a lot David!
Both methods worked great!
Pei-Ying
________________________________
From: David E DeMarle <dave.dema...@kitware.com>
To: Pei-Ying Hsieh <phsieh2...@yahoo.com>
Cc: paraview <paraview@paraview.org>
Sent: Wednesday, April 25, 2012 3:23 PM
Subject: Re: [Paraview] calculate flow rate through a "selected" cross-section?
On Wed, Apr 25, 2012 at 3:04 PM, Pei-Ying Hsieh <phsieh2...@yahoo.com> wrote:
> Hi, David,
>
> Thanks for the reply!
>
> I tried Generate Surface Normal first, then, did Integrate Variables. I got
> values for "Surface Normal (vector)" "p (scalar)" "U (vector)" ...
>
> It looks like integrate only sums up each parameter, so that, Surface Normal
> and U are still a vector. It does not do U dot A.
You still need the calculator filter to compute the dot product.
data->normals->calculator->integrate
>
> I have also tried Surface Flow. I got two values for Surface Flow,
> something like [-3.64248e-6 -3.64248e-6]. Shouldn't it be just one value?
>
Those two are the same value. It is an artifact of the fact that the
information tab typically shows characteristics of whole arrays. In
this case you have an array with just one element. Show the output of
the filter in the spreadsheet view instead.
> Pei-Ying
>
> ________________________________
> From: David E DeMarle <dave.dema...@kitware.com>
> To: Pei-Ying Hsieh <phsieh2...@yahoo.com>
> Cc: paraview <paraview@paraview.org>
> Sent: Wednesday, April 25, 2012 11:17 AM
> Subject: Re: [Paraview] calculate flow rate through a "selected"
> cross-section?
>
> Use Generate Normals before the calculator and Integrate Variables after.
>
> Also try the Surface Flow which I does all three operations at once.
>
> David E DeMarle
> Kitware, Inc.
> R&D Engineer
> 21 Corporate Drive
> Clifton Park, NY 12065-8662
> Phone: 518-881-4909
>
>
> On Wed, Apr 25, 2012 at 11:09 AM, Pei-Ying Hsieh <phsieh2...@yahoo.com>
> wrote:
>> Dear Paraview experts,
>>
>> I completed a CFD calculations which contains, U (velocity field) and p
>> (pressure field).
>> I used "extract selection" to select a cross section. I then would like
>> to
>> calculate the flow rate through this cross section, ie, U dot A. I tried
>> to
>> use the Calculator function. I saw U in the vector field. Is there a way
>> to have A (area, vector field) so that I can do U dot A, then, integrate U
>> dot A to have flow rate?
>>
>> Thanks!
>>
>> Pei-Ying
>>
>> _______________________________________________
>> Powered by www.kitware.com
>>
>> Visit other Kitware open-source projects at
>> http://www.kitware.com/opensource/opensource.html
>>
>> Please keep messages on-topic and check the ParaView Wiki at:
>> http://paraview.org/Wiki/ParaView
>>
>> Follow this link to subscribe/unsubscribe:
>> http://www.paraview.org/mailman/listinfo/paraview
>>
>
>
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview
