I believe the filter won't get deleted until after the proxy goes out of
scope. If I'm right, you need to call Delete() on it and then have the
variable that's holding the proxy either go out of scope or set to
something else.
Andy
On Wed, Dec 19, 2012 at 4:36 PM, David E DeMarle
<dave.dema...@kitware.com>wrote:
> Not sure why it isn't garbage collecting for you, but you might try
> moving the entire pipeline setup out of the loop and then inside the
> loop just call the two set filenames to modify the existing pipeline
> before calling Write().
>
> David E DeMarle
> Kitware, Inc.
> R&D Engineer
> 21 Corporate Drive
> Clifton Park, NY 12065-8662
> Phone: 518-881-4909
>
>
> On Wed, Dec 19, 2012 at 4:25 PM, Sebastian <sebastianst...@web.de> wrote:
> > Hello Karl,
> >
> > thank you for your message. I am using Paraview 3.14.1 (64bit).
> >
> > This is what my script looks like:
> >
> > # SETTINGS
> > directory_pvtu = '/scratch/mesh3mm_SEM/'
> > directory_csv = '/scratch/mesh3mm_SEM/Z085_velocity_data/'
> > file_number_start = 373527
> > file_number_end = 640332
> > file_interval = 693
> > file_name_pvtu = 'mesh3mm_SEM###file_number###.pvtu'
> > file_name_csv = 'mesh3mm_SEM###file_number###.csv'
> >
> > print 'Script started!'
> >
> > try: paraview.simple
> > except: from paraview.simple import *
> >
> > while file_number_start <= file_number_end :
> >
> > current_file_name_pvtu = file_name_pvtu.replace('###file_number###',
> > str(file_number_start))
> > current_file = XMLPartitionedUnstructuredGridReader(
> FileName=[directory_pvtu
> > + current_file_name_pvtu] )
> >
> > current_file.PointArrayStatus = ['Velocity']
> >
> > SetActiveSource(current_file)
> >
> > Slice1 = Slice( SliceType = 'Plane' )
> > Slice1.SliceOffsetValues = [0.0]
> > Slice1.SliceType.Origin = [0.0, 0.0, 0.136711]
> > Slice1.SliceType.Normal = [0.0, 0.0, 1.0]
> >
> > SetActiveSource(Slice1)
> >
> > Slice2 = Slice( SliceType = 'Plane' )
> > Slice2.SliceOffsetValues = [0.0]
> > Slice2.SliceType.Origin = [0.0, 0.227757, 0.0]
> > Slice2.SliceType.Normal = [0.0, 1.0, 0.0]
> >
> > UpdatePipeline()
> > current_file_name_csv = file_name_csv.replace('###file_number###',
> > str(file_number_start))
> > writer = CreateWriter(directory_csv + current_file_name_csv, Slice2)
> > writer.FieldAssociation = 'Points'
> > writer.UpdatePipeline()
> > del writer
> >
> > Delete(Slice2)
> > Delete(Slice1)
> > Delete(current_file)
> >
> > files_to_go = (file_number_end-file_number_start)/file_interval
> > if files_to_go == 1:
> > case_word = 'file'
> > else:
> > case_word = 'files'
> > print current_file_name_csv + ' created, ' + str(files_to_go) + ' more
> ' +
> > case_word + ' to go!'
> >
> > file_number_start += file_interval
> >
> > print 'Script finished!'
> >
> > Best,
> > Sebastian
> >
> > _______________________________________________
> > Powered by www.kitware.com
> >
> > Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
> >
> > Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
> >
> > Follow this link to subscribe/unsubscribe:
> > http://www.paraview.org/mailman/listinfo/paraview
> _______________________________________________
> Powered by www.kitware.com
>
> Visit other Kitware open-source projects at
> http://www.kitware.com/opensource/opensource.html
>
> Please keep messages on-topic and check the ParaView Wiki at:
> http://paraview.org/Wiki/ParaView
>
> Follow this link to subscribe/unsubscribe:
> http://www.paraview.org/mailman/listinfo/paraview
>
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview
