Hi Andy and Utkarsh, Okay, so for the time being I decided to work with a fully blown Catalyst out of the ParaView src until I get my head around making editions. This allowed me to get the GitHub F90 example. However, with the original simulation, I have a different issue, which I'll start in a new thread.
Thanks, Mark From: Andy Bauer [mailto:andy.ba...@kitware.com] Sent: Thursday, August 15, 2013 9:47 AM To: Vanmoer, Mark W Cc: Utkarsh Ayachit; paraview@paraview.org Subject: Re: [Paraview] Building Catalyst Hi Mark, In the base edition of my version the only filter that I see that works is the Contour filter. If you use the coproc.py script for co-processing script and replace FECxxAdaptor.cxx you should be able to get it to run properly. The results will be garbage but it will produce a pvtp file. As for how to enable other filters in your build of Catalyst, that should be in section 4 of the user's guide or in http://www.paraview.org/Wiki/Generating_Catalyst_Source_Tree. The cmake.sh file is just a simplified build script and doesn't do anything as far as enabling extra filters by itself. Andy On Thu, Aug 15, 2013 at 10:08 AM, Vanmoer, Mark W <mvanm...@illinois.edu<mailto:mvanm...@illinois.edu>> wrote: Hi Andy and Utkarsh, I'm not sure I can share the original code, so I tried the GitHub example Andy linked. I configured it to use the Catalyst build directory for ParaView_DIR. I still get the import errors, which I see I can ignore, but then also Traceback (most recent call last): File "<string>", line 2, in <module> File "coproc.py", line 74, in DoCoProcessing coprocessor.UpdateProducers(datadescription) File "/home/mvanmoer/builds/Catalyst/1.0.alpha-build/lib/site-packages/paraview/coprocessing.py", line 102, in UpdateProducers self.CreatePipeline(datadescription) File "coproc.py", line 30, in CreatePipeline self.Pipeline = _CreatePipeline(self, datadescription) File "coproc.py", line 16, in _CreatePipeline class Pipeline: File "coproc.py", line 19, in Pipeline Slice1 = Slice( guiName="Slice1", Crinkleslice=0, SliceOffsetValues=[0.0], Triangulatetheslice=1, SliceType="Plane" ) NameError: name 'Slice' is not defined Okay, is this because of what you're talking about below, Utkarsh? That the Catalyst build won't necessarily have any particular filter in it, I'd have to specify what I need in the cmake.sh ahead of time? Mark From: Andy Bauer [mailto:andy.ba...@kitware.com<mailto:andy.ba...@kitware.com>] Sent: Wednesday, August 14, 2013 8:48 PM To: Utkarsh Ayachit Cc: Vanmoer, Mark W; paraview@paraview.org<mailto:paraview@paraview.org> Subject: Re: [Paraview] Building Catalyst Utkarsh, Is it worth the trouble to get rid of these error messages in Catalyst? Also, the most up-to-date version of the user's guide is at http://paraview.org/Wiki/images/4/48/CatalystUsersGuide.pdf. Andy On Wed, Aug 14, 2013 at 9:33 PM, Utkarsh Ayachit <utkarsh.ayac...@kitware.com<mailto:utkarsh.ayac...@kitware.com>> wrote: These are more of warning than errors. Catalyst can be thought of as a stripped down ParaView. Several modules/components are removed to keep the package small. There will be several "editions" of catalyst based on which components they contain. The idea is one decides which filters/components they are interested in using in-situ. Then we can create a custom edition containing only those filters and the components needed to get those filters working. This is to keep the library size small for production runs. For testing, ParaView itself includes the library against which the simulation adaptors can link. Thus one can create/test adaptors using a regular ParaView itself. That will have all the modules ParaView includes and hence one can experiment with the which filters to use and pick to come up with the short list of filters that can then be used to create a custom edition. Within the next week or so, we are will have a couple more editions available that will include some of the commonly used filters. Hope that clarifies things a bit. FYI, there's a user's guide available too that may help clarify this: http://public.kitware.com/pipermail/paraview/2013-July/028795.html Utkarsh On Wed, Aug 14, 2013 at 6:18 PM, Vanmoer, Mark W <mvanm...@illinois.edu<mailto:mvanm...@illinois.edu>> wrote: > Okay, I was able to compile and run a Fortran code using the > FortranAdaptorAPI and I'm getting some errors. (I had this code working with > coprocessing and ParaView 3.14.1, so in theory it should still work). > > Error: Could not import vtkCommonComputationalGeometryPython > Error: Could not import vtkCommonMiscPython > Error: Could not import vtkCommonSystemPython > Error: Could not import vtkRenderingCorePython > Error: Could not import vtkFiltersCore > Error: Cannot import vtkPVServerManagerDefaultPython > Error: Cannot import vtkPVServerManagerRenderingPython > Error: Cannot import vtkPVServerManagerApplicationPython > Error: Could not create TimeKeeper > Error: Could not create AnimationScene > > How do I get Catalyst to import these? Is it just a matter of setting > $PYTHONPATH? > > Mark > > >> -----Original Message----- >> From: Utkarsh Ayachit >> [mailto:utkarsh.ayac...@kitware.com<mailto:utkarsh.ayac...@kitware.com>] >> Sent: Wednesday, August 14, 2013 4:05 PM >> To: Vanmoer, Mark W >> Cc: paraview@paraview.org<mailto:paraview@paraview.org> >> Subject: Re: [Paraview] Building Catalyst >> >> Great! Feel free to ping the list if you run into issues or need assistance. >> >> Utkarsh >> >> On Wed, Aug 14, 2013 at 4:21 PM, Vanmoer, Mark W >> <mvanm...@illinois.edu<mailto:mvanm...@illinois.edu>> wrote: >> > Utkarsh, >> > It did build this time, thank you. >> > Mark >> > >> >> -----Original Message----- >> >> From: Vanmoer, Mark W >> >> Sent: Wednesday, August 14, 2013 11:57 AM >> >> To: 'Utkarsh Ayachit' >> >> Cc: paraview@paraview.org<mailto:paraview@paraview.org> >> >> Subject: RE: [Paraview] Building Catalyst >> >> >> >> Utkarsh, >> >> I was just running ccmake, I read the wiki as cmake.sh was for >> >> building Catalyst from the ParaView source tree. I'll try the >> >> cmake.sh with the new tarball and report back. >> >> >> >> Mark >> >> >> >> > -----Original Message----- >> >> > From: Utkarsh Ayachit >> >> > [mailto:utkarsh.ayac...@kitware.com<mailto:utkarsh.ayac...@kitware.com>] >> >> > Sent: Wednesday, August 14, 2013 11:52 AM >> >> > To: Vanmoer, Mark W >> >> > Cc: paraview@paraview.org<mailto:paraview@paraview.org> >> >> > Subject: Re: [Paraview] Building Catalyst >> >> > >> >> > Mark, >> >> > >> >> > No, you wouldn't need to use any external VTK. I've posted an >> >> > updated tarball. Feel free to give that a try. Also, how are you >> >> > starting the build? Using cmake.sh script included in the package? >> >> > >> >> > Utkarsh >> >> > >> >> > On Wed, Aug 14, 2013 at 11:38 AM, Vanmoer, Mark W >> >> > <mvanm...@illinois.edu<mailto:mvanm...@illinois.edu>> wrote: >> >> > > Hi, I'm trying to build Catalyst using the tarball from the >> >> > > Catalyst download page. I'm getting the following error during >> >> > > the CMake configure >> >> > > step: >> >> > > >> >> > > >> >> > > >> >> > > CMake Error at VTK/CMake/vtkModuleTop.cmake:29 (message): >> >> > > >> >> > > No such module "vtkChartsCore" needed by >> >> > "vtkPVServerManagerApplication" >> >> > > >> >> > > Call Stack (most recent call first): >> >> > > >> >> > > VTK/CMake/vtkModuleTop.cmake:45 (vtk_module_check) >> >> > > >> >> > > VTK/CMake/vtkModuleTop.cmake:52 (vtk_module_check) >> >> > > >> >> > > VTK/CMakeLists.txt:348 (include) >> >> > > >> >> > > >> >> > > >> >> > > Is all of the necessary VTK with the Catalyst tarball, or do I >> >> > > need to have a separate VTK build? >> >> > > >> >> > > >> >> > > >> >> > > Thanks, >> >> > > >> >> > > Mark >> >> > > >> >> > > >> >> > > _______________________________________________ >> >> > > Powered by www.kitware.com<http://www.kitware.com> >> >> > > >> >> > > Visit other Kitware open-source projects at >> >> > > http://www.kitware.com/opensource/opensource.html >> >> > > >> >> > > Please keep messages on-topic and check the ParaView Wiki at: >> >> > > http://paraview.org/Wiki/ParaView >> >> > > >> >> > > Follow this link to subscribe/unsubscribe: >> >> > > http://www.paraview.org/mailman/listinfo/paraview >> >> > > >> > > _______________________________________________ Powered by www.kitware.com<http://www.kitware.com> Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://www.paraview.org/mailman/listinfo/paraview
