Murali,
Have you tried ParaView's filter named "Clip?"
By default the clipping surface is a plane. Mind the "Inside Out"
check box; it determines which side is kept, the other side is
discarded.
Using the filter twice, will give you the bracket [2.4,3]
Alternatively, one can select the Clip Type to be a "Box."
If you don't like the aspect ratio of the finished result, you can
use ParaView's filter named "Transform."
Hope this helps.
Sam
On 5/28/2014 10:55 AM, Muralikrishna
Raju wrote:
Hello,
I have .csv file with columns x,y and c. I want
to generate a 2D plot where the (x,y) grid is colored
according to c.
I read in the .csv file, then I apply the table to
points filter followed by delaunay 2d filter. I see the
plot I want. My issue is the x axis is from 0 to 5 and I
want to crop it to 2.4 to 3.
I read online that there is a crop filter, but in my
windows version, I don’t see the crop filter. Is there a
way to add crop filter?
A work around I have is to change my .csv file to
include only the points where x value is between 2.4 and
3. The issue with this is my Delaunay plot is not square.
My length along x axis is very small compared to my length
on y axis. Is there a way to make the x and y axes of same
length? The x-range is [2.4,3] and y-range is [0,6]. So
you can imagine the x axis length (0.6) is way smaller
than y-axis length of 6. I would like to have a square
plot.
Thanks,
Murali
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView
Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview
|
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Follow this link to subscribe/unsubscribe:
http://www.paraview.org/mailman/listinfo/paraview