Hello, An update on this issue that I'm still having: I tried to pinpoint the source of the problem. I went through Paraview and VTK code, and found that there is a check that fails to pass apparently, resulting in the errors previously mentionned. This check fails on the Paraview side. In VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx (from which vtkPVPostFilterExecutive inherits), the InputTypeIsValid (l.763) function seems to check for data type, and fails to find a matching type when I try to visualize the data extracted from the PVTrivialProducer. The recorded type (with input->GetClassName()) is vtkDataObject and the IsA function is unable to match it with any of the type in the list iterated over.
Did I went to far in the code ? Could the information about the Unstructured grid nature be lost when I extract the data in Paraview ? By the way, this list is probably not the right place to talk about it, since it is related to VTK, but isn't the error printed when no match is found a bit confusing for the user ? I mean if the function does not find a valid type, it will by default choose the first type of the list, resulting in the kind of errors I had (vtkPolyData in my case): vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type vtkDataObject, but a vtkPolyData is required. Whereas the type checked was not matched with any type, thus not a vtkPolyData. By the way, if you want to have a look at the C++ code used in our library, it is available in: https://github.com/feelpp/feelpp/blob/develop/feel/feelfilters/exporterVTK_impl.hpp With: - the initialization part starting at line 115 - the coprocessing part starting at line 406 Thanks again for the help, Best regards, Alexandre Ancel On Mon, Nov 24, 2014 at 4:56 PM, Alexandre Ancel <alexandre.an...@cemosis.fr > wrote: > Hello, > > I tested writing data from the python script, and the data is apparently > written correctly > when opening the files with Paraview. The issue is only present I try to > extract the data in Paraview. > I'll continue to investigate both in my code and Paraview. If you have > other pieces of advice as to where I could be looking, I would be > interested. > > I will also test if I can reproduce the issue with one of the example. > > Regards, > Alexandre Ancel > > On Fri, Nov 21, 2014 at 10:57 PM, Andy Bauer <andy.ba...@kitware.com> > wrote: > >> Hi Alexandre, >> >> If you could reproduce the errors that you're getting in one of the >> examples, we could try to track that down. I tried using your script and >> didn't have any issues with the CxxFullExample in the Catalyst example code >> and PV 4.2. >> >> >> Regards, >> Andy >> >> On Fri, Nov 21, 2014 at 12:14 PM, Dan Lipsa <dan.li...@kitware.com> >> wrote: >> >>> >>>> When I click on the icon located near the producer to visualize the >>>> data, I get an Extract component added to the pipeline. Trying to visualize >>>> this, then throws me the following errors: >>>> >>>> --- >>>> ERROR: In >>>> /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, >>>> line 810 >>>> vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on >>>> input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type >>>> vtkDataObject, but a vtkPolyData is required. >>>> >>>> >>>> ERROR: In >>>> /home/ancel/Downloads/ParaView-v4.2.0-source/VTK/Common/ExecutionModel/vtkDemandDrivenPipeline.cxx, >>>> line 810 >>>> vtkPVPostFilterExecutive (0x3efc890): Input for connection index 0 on >>>> input port index 0 for algorithm vtkPVPostFilter(0x3efbe70) is of type >>>> vtkDataObject, but a vtkPolyData is required. >>>> >>>> >>>> ERROR: In >>>> /home/ancel/Downloads/ParaView-v4.2.0-source/ParaViewCore/ServerManager/Rendering/vtkSMParaViewPipelineControllerWithRendering.cxx, >>>> line 504 >>>> vtkSMParaViewPipelineControllerWithRendering (0x38bbc00): Data cannot >>>> be shown in the defaulted render view!! >>>> --- >>>> >>> >>> I have not run an example for an unstructured grid. It should work >>> similarly though. >>> I recently wrote a Catalyst adapter for an unstructured grid. I will run >>> Catalyst Live with that to see how that works. >>> >>> You could try however to save images or entire data from the pipeline >>> script as it is done in the Catalyst examples. >>> >>> >>> >>>> A few more questions come in my mind now: >>>> - If I understand correctly and if the user wants to pause the >>>> simulation, for example when he has only 1 timestep, he would have to do >>>> the following steps: >>>> * Connect with catalyst in Paraview >>>> * Set a breakpoint for time step 0 >>>> * launch the simulation >>>> Is that alright ? >>>> Would it be possible to do this with the play/next frame paraview >>>> buttons ? >>>> >>> >>> The communication between catalyst and the simulation happens only at >>> time steps. Because of that, Catalyst could only stop the simulation at >>> time step 2. >>> >>> >>> - Looking at the last lines of the blog post concerning pvserver. Is >>>> pvserver catalyst enabled by default ? >>>> >>> Yes. >>> >>> >>>> Does it mean that I can build the following pipeline ? >>>> Paraview (local computer) <-> pvserver (cluster frontal node) <-> >>>> catalyst enabled simulation (cluster nodes) >>>> >>> >>> You need to enable MPI to be able to run this. pvserver is the paraview >>> server that does all the rendering, only images are sent to ParaView (GUI). >>> >>> Dan >>> >>> >>> _______________________________________________ >>> Powered by www.kitware.com >>> >>> Visit other Kitware open-source projects at >>> http://www.kitware.com/opensource/opensource.html >>> >>> Please keep messages on-topic and check the ParaView Wiki at: >>> http://paraview.org/Wiki/ParaView >>> >>> Follow this link to subscribe/unsubscribe: >>> http://public.kitware.com/mailman/listinfo/paraview >>> >>> >> > > > -- > Alexandre Ancel > Docteur, Ingénieur de recherche / Phd, Research Engineer > Cemosis <http://www.cemosis.fr> - alexandre.an...@cemosis.fr > Tel: +33 (0)3 68 8*5 02 06* > IRMA - 7, rue René Descartes > 67 000 Strasbourg, France > -- Alexandre Ancel Docteur, Ingénieur de recherche / Phd, Research Engineer Cemosis <http://www.cemosis.fr> - alexandre.an...@cemosis.fr Tel: +33 (0)3 68 8*5 02 06* IRMA - 7, rue René Descartes 67 000 Strasbourg, France
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview