Utarsh,
Yes, I think that DEPL is "déplacement" in French - that is displacement
in English.
I tried to do the job. I opened with Paraview my vtm file with all the
timesteps, I copied pasted the formulas of the two calculators I found
in your state file in my two calculators, but no movement if I clic play.
Probably I did something wrong...
Amel
Le 09. 07. 15 23:05, Utkarsh Ayachit a écrit :
Amel,
What's the Result_DEPL array? Is that displacement? Assuming that, I
applied two calculators: first to convert the Result_DEPL array to a 3
component vector and the second to translate the coordinate positions
using the vector computed by the previous one. If the Result_DEPL
changes in your dataset over time, you'll see the movement.
State file attached.
Utarsh
On Thu, Jul 9, 2015 at 12:19 AM A. Kapetanovic <a...@alphanet.ch
<mailto:a...@alphanet.ch>> wrote:
Utkarsh,
I did something on google drive, I shared the file with your e-mail and
here you have the url :
https://drive.google.com/open?id=0B_ag1ge2Wc1nSS10M1JYampTb00
I hope all is OK like this, it's the first time I use google drive. Say
me please if something misses.
Regards :)
Le 08. 07. 15 22:47, Utkarsh Ayachit a écrit :
> Amel,
>
> The dataset didn't come through, I am afraid. Is it may be easier to
> upload it somewhere eg. dropbox/google drive?
>
> Utkarsh
>
> On Wed, Jul 8, 2015 at 3:54 PM A. Kapetanovic <a...@alphanet.ch
<mailto:a...@alphanet.ch>
> <mailto:a...@alphanet.ch <mailto:a...@alphanet.ch>>> wrote:
>
> WARNING: this mail was modified in transit:
> defanged (renamed/protected) 07.hdf because file type
unknown.
> Rename defang-0.binary to 07.hdf if you want to access the
file anyway
>
> More details at:
> http://www.alphanet.ch/alphanet/anti-spam.html
> Hi,
>
> Thanks for your reply.
>
> Of course I have data to share. The rmed result comressed
file is too
> big (35 MB), so I send here the hdf and comm files, you only
need to
> compute the (3) meshes and to run the simulation to have this
rmed file.
>
> Say me if you need something else, I hope all is clear enough
like
> this :)
>
> Amel
>
>
> Le 08. 07. 15 15:44, Utkarsh Ayachit a écrit :
> > Do you have a sample dataset to share? That'll make this
easier.
> >
> > Typically, movement comes from one of the following:
> > 1. Readers: the reader itself translates the points in the
grid
> as time
> > changes
> > 2. Filters: if the grid doesn't change but has attributes that
> indicate
> > the displacement, one can apply a filter to transform the
grid using
> > those displacement vectors.
> >
> > Utkarsh
> >
> > On Wed, Jul 8, 2015 at 3:59 AM <a...@alphanet.ch
<mailto:a...@alphanet.ch>
> <mailto:a...@alphanet.ch <mailto:a...@alphanet.ch>>
> > <mailto:a...@alphanet.ch <mailto:a...@alphanet.ch>
<mailto:a...@alphanet.ch <mailto:a...@alphanet.ch>>>> wrote:
> >
> > Hi,
> >
> > I am using Paraview with Salome-Meca + Code_Aster and
I have
> e little
> > problem : impossible to see the movement of a part that is
> moving.
> >
> > In fact the simulation is very simple : I have 2
cylinders,
> one is
> > fixed by
> > one face and the other have a movement on a face. The
simulation
> > converges
> > and when I open the mmed or rmed file (result) with
Paraview,
> > impossible to
> > see any movement even if I clic "play".
> >
> > Simply nothing happens.
> >
> > Can please someone help me ?
> >
> > Best regards,
> >
> > Amka
> > _______________________________________________
> > Powered by www.kitware.com <http://www.kitware.com>
<http://www.kitware.com>
> <http://www.kitware.com>
> >
> > Visit other Kitware open-source projects at
> > http://www.kitware.com/opensource/opensource.html
> >
> > Please keep messages on-topic and check the ParaView
Wiki at:
> > http://paraview.org/Wiki/ParaView
> >
> > Search the list archives at:
> http://markmail.org/search/?q=ParaView
> >
> > Follow this link to subscribe/unsubscribe:
> > http://public.kitware.com/mailman/listinfo/paraview
> >
>
_______________________________________________
Powered by www.kitware.com
Visit other Kitware open-source projects at
http://www.kitware.com/opensource/opensource.html
Please keep messages on-topic and check the ParaView Wiki at:
http://paraview.org/Wiki/ParaView
Search the list archives at: http://markmail.org/search/?q=ParaView
Follow this link to subscribe/unsubscribe:
http://public.kitware.com/mailman/listinfo/paraview