Juan, Can you share a sample dataset to reproduce this issue?
Thanks Utkarsh On Wed, Jul 6, 2016 at 5:37 AM, Juan Valverde <j.valve...@virtualmech.com> wrote: > Hi there, > > We are working with Syrthes thermal. The output of such program is > written in Ensight case format, version 6. All data is imported > correctly from Paraview 4.3.1 except for one node, we tested in several > different problems, whose temperature nodal value is incorrect. It > should be 7.12e+02, and ends up being 7.12e22, to give an example. > Therefore, the maximum is unreal and the whole surface plot is ruined. I > checked with Paravis inside Salome 7.7.1 and 7.6.0, and also, as pointed > out before with Paraview 4.3.1. > > I also run the ens_checker (ensight case file health checker) on the > files and they seem to be ok. I also inspected the results file and all > nodal data is correct, no e+22 found in these files. > > Did anybody have the same problem? It seems related to the Ensight > reader or plugin used by Paravis/Paraview. > Attached example plots. > Any help would be much appreciated. > > Regards, > > Juan > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Search the list archives at: http://markmail.org/search/?q=ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > _______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview
