I see. I was going to say that follow this tutorial (except the connector part) and set the rate to 120 as mentioned by Cory
http://cismm.web.unc.edu/core-projects/visualization-and-analysis/setting-up-a-simple-stereo-system/ On Wed, Oct 12, 2016 at 2:16 PM Gao <g...@pztop.com> wrote: > Hi Aashish, > > The monitor is Asus VG236H. Not sure about "vertical interlaced". > > Gao > > On 2016-10-12 11:02 AM, Aashish Chaudhary wrote: > > Is the monitor is vertical interlaced? > > - Aashish > > On Wed, Oct 12, 2016 at 1:55 PM Gao <g...@pztop.com> wrote: > > Hi Cory, > > I just tried "Onboard DIN connector (with NVIDIA 3D ...)" and it's still > not showing 3D stereo. > > My system is a Dell Precision workstation come with a Quadro 4000 video > card (No DIN connection). The demo 3D test from Nvidia Control Panel works > fine so I think the driver is loaded correctly. > > I just installed the new Paraview 5.2 RC1 and it does the same: No 3D but > flickering. > > I also tried other modes and none of them works. > > Is there any special setting I need config in ParaView? > > Thanks for the help. > > Gao > > > > > On 2016-10-12 08:51 AM, Cory Quammen wrote: > > Hi Gao, > > Attached is an image of the relevant NVIDIA Control Panel settings for our > working ParaView stereo display setup. It looks like the main change from > your setup is to change "Stereo - Display Mode" to "Onboard DIN connector > (with NVIDIA 3D ...)". > > For your reference, our system runs Windows 10 and has a Quadro M5000 and > an ASUS VG248QE 24-inch Full HD display. We did not need the optional 3-pin > DIN connector port that seems almost impossible to buy anywhere. > > HTH, > Cory > > On Tue, Oct 11, 2016 at 3:17 PM, Gao <g...@pztop.com> wrote: > > Hi all, > > I am trying to make the stereo 3D working on Paraview but it doesn't work. > I don't know what is the problem. > > I got NVIDIA 3D VISION 2 glasses and set it up on my Windows 10 PC. > Installed the driver for the QUADRO 4000 card. Tested with the Nvidia > Control Panel (version 8.1.1030.0) and the I can see the 3D demo through > the glasses. > > Then I downloaded a sample vtk file from here: > > > http://www.subdude-site.com/WebPages_Local/RefInfo/Computer/Linux/LinuxGuidesByBlaze/apps3Dtools/3D_viewers-converters/3Dtestfiles/vtk/rbc_001.vtk > > I changed some setting on Nvidia Control Panel: > Manage 3D setting: > Stereo - Display mode : Generic active stereo (with NVIDIA 3D Vision) > Stereo -Enable: On > Stereo -Swap eyes: Off > > Now I run paraview with: > paraview.exe --stereo --stereo-type="Crystal Eyes" > > Then I open the vtk file I downloaded. I don't see 3D, and the image is > flickering. But the emitter green light is ON. > > Can someone help me to get this 3D display going? > > Thanks. > > Gao > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Search the list archives at: http://markmail.org/search/?q=ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > > > > > -- > Cory Quammen > Staff R&D Engineer > Kitware, Inc. > > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at > http://www.kitware.com/opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Search the list archives at: http://markmail.org/search/?q=ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > > >
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview