Adam, No, there is no 'create new view as copy of current view' command. Dan
On Mon, Feb 27, 2017 at 10:56 AM, Adam Dershowitz <adershow...@exponent.com> wrote: > Maybe my question wasn’t clear. What I want to know is if there is any > way to copy the settings from one view to another. For example if I turn > on the visibility of a few filters (click on the eye) and then turn off > others, and, finally make some other changes such as coloring of object I > can set up a view that I like. Next, I want to start from that identical > view to the one that I setup, but just move the camera from that view. So, > I want to setup things how I want (filter visibility, colors etc) then make > a second view that is a copy of that first view. Then, I want to start > from that second view to move my camera etc. > > > > As you indicate below, I can edit things in a view and change the > visibility in each view. But, I already have a view that I like, and now I > want to make that into a split view with the identical visibility etc. Do, > I have to manually start turning on and off all of the filter visibility > etc? > > What I am looking for is “copy current pipeline visibility” and then apply > that to another view. Or, “create new view as copy of current view” Then, > I can start making changes from that point. > > > > I don’t see a way to do that. > > > > Thanks, > > > > -- Adam > > > > > > *From: *Dan Lipsa <dan.li...@kitware.com> > *Date: *Thursday, February 23, 2017 at 3:35 PM > *To: *Dershowitz Adam <adershow...@exponent.com> > *Cc: *"paraview@paraview.org" <paraview@paraview.org> > *Subject: *Re: [Paraview] Duplicate Renderview > > > > Adam, > > You can show the same data in different views. Just click on the eye next > to the filter which output you want to see. > > > > So for instance, if you show the data from the last filter in one view, > clicking on the eye next to that filter will show the same thing in the > second view. > > > > So, the starting point does exactly what you want. Note that the settings > for how data is displayed in a view are stored per (filter, view) pair. > > You can change those by selecting the filter and the view you want and > changing the display settings. > > > > I hope this helps, > > Dan > > > > > > On Wed, Feb 22, 2017 at 10:16 AM, Adam Dershowitz < > adershow...@exponent.com> wrote: > > I have a pipeline setup, with a good renderview. I want to then make a > split view, that is identical, except for the camera angle. When I try to > split my view, or create a new view, they show up empty. I can then start > manually turning on, and coloring everything how I want it. But, it seems > like there should be an option to “duplicate current pipeline settings” as > a starting point. Then, I could move the camera or make any other changes > that I want from there. > > I did search around in Paraview and on the web, but didn’t find anything. > Is there an easy way to do this? I did find a few other discussions about > this, with suggested scripts, but those fail for me as well. > > I’m using Paraview 5.2, although I also looked around briefly for a way to > do this in 5.3RC1. > > > > Thanks, > > > > -- Adam > > > > > _______________________________________________ > Powered by www.kitware.com > <https://urldefense.proofpoint.com/v2/url?u=http-3A__www.kitware.com&d=DwMFaQ&c=t0wRGL5ICVzH157W8C8Wew&r=5usL3OGqXabRLtSzGmh8YEvbco28TaiOmWcn6rCn8wM&m=oWi4XRXRPfgz4qKaAAQtDqKmOLrqDHEwbLsCwbV_xuU&s=UTmtwcqSbMruMWQNapPgt2pjh8juMpV6fxB4b-veHB8&e=> > > Visit other Kitware open-source projects at http://www.kitware.com/ > opensource/opensource.html > <https://urldefense.proofpoint.com/v2/url?u=http-3A__www.kitware.com_opensource_opensource.html&d=DwMFaQ&c=t0wRGL5ICVzH157W8C8Wew&r=5usL3OGqXabRLtSzGmh8YEvbco28TaiOmWcn6rCn8wM&m=oWi4XRXRPfgz4qKaAAQtDqKmOLrqDHEwbLsCwbV_xuU&s=9vxMWTnqgSsfsc-A4qf_xgswkB5j-W886XK5YvwZvEY&e=> > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > <https://urldefense.proofpoint.com/v2/url?u=http-3A__paraview.org_Wiki_ParaView&d=DwMFaQ&c=t0wRGL5ICVzH157W8C8Wew&r=5usL3OGqXabRLtSzGmh8YEvbco28TaiOmWcn6rCn8wM&m=oWi4XRXRPfgz4qKaAAQtDqKmOLrqDHEwbLsCwbV_xuU&s=hj2KT97SpIdUPSLX8FgB_VjksbyXDb-pyNMx4RgKqz4&e=> > > Search the list archives at: http://markmail.org/search/?q=ParaView > <https://urldefense.proofpoint.com/v2/url?u=http-3A__markmail.org_search_-3Fq-3DParaView&d=DwMFaQ&c=t0wRGL5ICVzH157W8C8Wew&r=5usL3OGqXabRLtSzGmh8YEvbco28TaiOmWcn6rCn8wM&m=oWi4XRXRPfgz4qKaAAQtDqKmOLrqDHEwbLsCwbV_xuU&s=blQJP-VHJDV6vF-qH55d_ATxF-3XnwQcv3PWjID6ISc&e=> > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > <https://urldefense.proofpoint.com/v2/url?u=http-3A__public.kitware.com_mailman_listinfo_paraview&d=DwMFaQ&c=t0wRGL5ICVzH157W8C8Wew&r=5usL3OGqXabRLtSzGmh8YEvbco28TaiOmWcn6rCn8wM&m=oWi4XRXRPfgz4qKaAAQtDqKmOLrqDHEwbLsCwbV_xuU&s=pr8VcfYA6gBQmsYh85zmcAl7PydyIQNFedRO-Ua3Tsg&e=> > > >
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview