You are right about v4.0.1. Though it creates 8 vtu files, only the first one contains all the points while the other seven are empty.
And yes, changing the Masking to All Points worked. Thanks again for your help! P.S. I was reading THIS <http://www.kennethmoreland.com/documents/EGPGV2006Paper.pdf> paper and realized you were one of the authors. Nice read. On Mon, Mar 6, 2017 at 1:18 PM, Moreland, Kenneth <kmo...@sandia.gov> wrote: > Sorry, I might have mislead you a little bit before. What you actually > need is the Glyph filter with Glyph Type set to 2D Glyph and then the > secondary Glyph Type set to Vertex. > > > > By default the glyph filter subsamples the data (to prevent occlusion when > creating glyphs with size). Under Masking change the Glyph Mode to All > Points, and you should get what you want. > > > > Also, check the vtu files being generated by ParaView 4.0.1 carefully. I > suspect one of them is very large and all the others are very small. I > think the old version of ParaView is writing a bunch of vtu files with no > points whereas new versions of ParaView are not writing out pointless empty > vtu files. > > > > -Ken > > > > *From:* Faiz Abidi [mailto:fabid...@vt.edu] > *Sent:* Sunday, March 5, 2017 4:09 PM > > *To:* Moreland, Kenneth <kmo...@sandia.gov> > *Cc:* ParaView <paraview@paraview.org>; Rajamohan, Srijith < > sriji...@vt.edu>; Nicholas Polys <npo...@vt.edu>; Ayat Mohammed < > maaa...@vt.edu> > *Subject:* Re: [EXTERNAL] Re: [Paraview] CSV to PVTU > > > > Btw, I am a bit confused that why after applying a "2D Glyph" filter and > "Glyph Type" as "Vertex", the number of points decreases. For example, if > after applying "TableToPoints" filter I have 1 cell and 100k points, I get > 502 cells and 502 points after applying a "2D Glyph" filter. I was > expecting the number of cells to increase but total number of points should > have remained 100k, no? > > > > I am not really sure if applying a 2D Glyph is the best solution in my > case. I may go back to using 4.0.1 to convert this csv data into pvtu and > then use the latest version to load it up. > > > > On Fri, Mar 3, 2017 at 2:14 PM, Faiz Abidi <fabid...@vt.edu> wrote: > > I see. > > > I did that because when I choose "Assign Cells Uniquely" as the "Boundary > Mode" in the D3 filter, I was getting a warning like below: > > Warning: In /home/faiz89/git/ParaView/VTK/Common/DataModel/vtkKdTree.cxx, > line 1887 > vtkKdTree (0x2db5950): vtkKdTree::BuildMapForDuplicatePoints - invalid > tolerance > > > > But in spite of the warning, 8 vtu files get generated along with 1 pvtu > file. So, maybe that warning can be ignored. > > > > On Thu, Mar 2, 2017 at 6:42 PM, Moreland, Kenneth <kmo...@sandia.gov> > wrote: > > I’m pretty sure if you select Duplicate Cells it will just copy all the > points to all processes, so that is not a good option. The divide cells is > also giving poor results on this front. I think you are better off using > the 2D Glyph filter to break up the cell first. > > > > -Ken > > > > *From:* Faiz Abidi [mailto:fabid...@vt.edu] > *Sent:* Thursday, March 2, 2017 2:44 PM > *To:* Moreland, Kenneth <kmo...@sandia.gov> > *Cc:* ParaView <paraview@paraview.org>; Rajamohan, Srijith < > sriji...@vt.edu>; Nicholas Polys <npo...@vt.edu>; Ayat Mohammed < > maaa...@vt.edu> > *Subject:* Re: [EXTERNAL] Re: [Paraview] CSV to PVTU > > > > Ohk, that makes more sense. I could get it to work as well but also had to > check "Boundary Mode" as "Duplicate Cells" while applying the D3 filter. > > > > Thanks Moreland! > > > > On Thu, Mar 2, 2017 at 3:59 PM, Moreland, Kenneth <kmo...@sandia.gov> > wrote: > > Faiz, > > > > I was able to replicate your problem. It looks like it is not an issue > with D3 but a change with how Table to Points creates data (or perhaps how > data are written). It looks like Table to Points is creating one “cell” > with a lot of points. This saves a little memory but ends up preventing D3 > from dividing the points up. > > > > The best solution is to add a “2D Glyph” filter after the Table to Points > but before the D3 filter. Set the “Glyph Type” to “Vertex”. Then apply the > D3 filter to the output of the 2D Glyph filter. > > > > -Ken > > > > *From:* Faiz Abidi [mailto:fabid...@vt.edu] > *Sent:* Thursday, March 2, 2017 1:38 PM > *To:* Moreland, Kenneth <kmo...@sandia.gov> > *Cc:* ParaView <paraview@paraview.org>; Rajamohan, Srijith < > sriji...@vt.edu>; Nicholas Polys <npo...@vt.edu>; Ayat Mohammed < > maaa...@vt.edu> > *Subject:* [EXTERNAL] Re: [Paraview] CSV to PVTU > > > > Hi Moreland, > > > > Thanks for your reply. > > > > I thought same except maybe not use the GUI since my data is big and takes > forever to load up in Paraview. > > > > Quick question/observation - using the GUI and 8 processes, and applying > the Tables to Points filter + D3 and then trying to save files doesn't > create 8 vtu files and 1 pvtu file as expected. Instead, what happens is > that I get only 1 pvtu file along with 1 vtu file instead. Clearly > something wrong. This was done using v5.2.0. > > > > I tried the same thing using v4.0.1 (yes, old but it works!) and I got 8 > vtu files and 1 pvtu file as expected. > > > > Do you think this is a bug with 5.2.0? Or do I need to do something > different with 5.2.0? Any pointers appreciated! > > > > On Wed, Mar 1, 2017 at 4:15 PM, Moreland, Kenneth <kmo...@sandia.gov> > wrote: > > You can use ParaView itself to read in the csv file, convert it to an > unstructured grid (Table to Points filter), redistributed on your 8 > parallel processors (D3 filter) and then write out a pvtu file. > > > > Offhand I cannot think of an easier way. > > > > -Ken > > > > *From:* ParaView [mailto:paraview-boun...@paraview.org] *On Behalf Of *Faiz > Abidi > *Sent:* Wednesday, March 1, 2017 2:03 PM > *To:* ParaView <paraview@paraview.org> > *Subject:* [EXTERNAL] [Paraview] CSV to PVTU > > > > Hi again community! > > > > Looking for suggestions - what would be a decently fast way to convert a > huge CSV file into PVTU files? > > > > What I want to do - load this huge file in a CAVE like environment, and > use 8 parallel processors. > -- > > Faiz Abidi | Master's Student at Virginia Tech | www.faizabidi.com | > +1-540-998-6636 <(540)%20998-6636> > > > > > > -- > > Faiz Abidi | Master's Student at Virginia Tech | www.faizabidi.com | > +1-540-998-6636 <(540)%20998-6636> > > > > > > -- > > Faiz Abidi | Master's Student at Virginia Tech | www.faizabidi.com | > +1-540-998-6636 <(540)%20998-6636> > > > > > > -- > > Faiz Abidi | Master's Student at Virginia Tech | www.faizabidi.com | > +1-540-998-6636 <(540)%20998-6636> > > > > > > -- > > Faiz Abidi | Master's Student at Virginia Tech | www.faizabidi.com | > +1-540-998-6636 <(540)%20998-6636> > -- Faiz Abidi | Master's Student at Virginia Tech | www.faizabidi.com | +1-540-998-6636
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview