I'm just wondering what interpolation scheme is used for data manipulation in Paraview?
I'm using Paraview 5.2.0. I want to measure the velocity very close to a wall surface so that I can obtain the wall shear stress. However, I found the velocity measured using Paraview is different from the results I have obtained using the postprocessing tool in OpenFoam. Compared with the analytical solution which is already known in my case, Paraview result is worse and is 10% smaller than the analytical solution while the OpenFoam result agrees with the analytical solution very well. With finer mesh, the difference between the Paraview and OpenFoam results becomes smaller, so I believe the difference is due to the interpolation error. Anyone who has experience on this problem? Is there any advanced interpolation scheme that I can use in Paraview? Many thanks, Wilson
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview