Is the slice axis aligned? If so, you can use a regular source eg. Wavelet or Mandlebrot to generate the evenly spaced points by setting the extents appropriately.
Utkarsh On Mon, Oct 23, 2017 at 2:41 AM, Andrew <antech...@gmail.com> wrote: > Hello. > I need to distribute points on a slice equally to start streamlines from > these points. The problem is that the Mask Points filter seems to not to > have such option. I tried all combinations of randomizing in this filter > but the problem persist. My mesh is unstructured tetra with inflation > layers on wall so there are lots of cells (points) at the wall and almost > all streamlines start in near-wall region while I need their starting > points to be equally distributed along the slice. Is there a way to do it > in ParaView? > Thanks for attention... > > _______________________________________________ > Powered by www.kitware.com > > Visit other Kitware open-source projects at http://www.kitware.com/ > opensource/opensource.html > > Please keep messages on-topic and check the ParaView Wiki at: > http://paraview.org/Wiki/ParaView > > Search the list archives at: http://markmail.org/search/?q=ParaView > > Follow this link to subscribe/unsubscribe: > http://public.kitware.com/mailman/listinfo/paraview > >
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: http://public.kitware.com/mailman/listinfo/paraview