Joachim, Quick question about PV >= 5.5 RC1 ... I have downloaded the RC3, how do I install it? I cannot find any 'make' or 'install' file ... Is it provided to run "out of the box"?
Regards, Carlos 2018-03-26 20:36 GMT+02:00 Joachim Pouderoux <joachim.pouder...@kitware.com> : > Carlos, > > OpenFOAM can produce cells with non planar faces which is not handled by > VTK/ParaView. Moreover it appears that current reader implementation can > also produce incorrect cells when reading wedge cells. > Thanks to a recent rewriting of the polydron clipping algorithm, the > clipping/slicing of polyhedron should no more lead to crashes. However,the > problems > of non planar faces might produce some holes in the result. > We are currently working on a patch to better handle this case in the > reader. > If you want to try the new polyhedron clipping algorithm, you will have > to use ParaView >= 5.5 RC1. > > Best regards, > Joachim > > > *Joachim Pouderoux*, PhD > > *Technical Expert - Scientific Computing Team* > *Kitware SAS <http://www.kitware.fr>* > > > 2018-03-26 14:29 GMT-04:00 Carlos E Manglano-Villamarin < > carlosemangla...@gmail.com>: > >> It's me again, I'm sorry, >> >> Problem NOT solved!!! ... Hardware looks ok, software and system handling >> memory looks good too. >> >> ParaView shuts down if I try to generate a clip with the "VTK Polyhedron" >> option selected, before and after clipping ... >> >> possible bug?? >> >> C. >> >> 2018-03-26 16:51 GMT+02:00 Shawn Waldon <shawn.wal...@kitware.com>: >> >>> Hi Carlos, >>> >>> That error message means that an exception was thrown from a Qt event >>> handler. The message about reimplementing QApplication::notify() is just >>> to tell you how to catch the exception if you wanted to. The real problem >>> is the exception. >>> >>> A std::bad_alloc exception happens when the program tries to allocate >>> memory and fails. So you need to figure out why you are running out of >>> memory (that is the most likely cause of the error). >>> >>> HTH, >>> Shawn >>> >>> On Mon, Mar 26, 2018 at 10:47 AM, Carlos E Manglano-Villamarin < >>> carlosemangla...@gmail.com> wrote: >>> >>>> Hi everyone! >>>> >>>> When I postprocess some simulations, less than 900,000 cells, from >>>> openfoam, either opening paraview directly or using the parafoam tool, the >>>> program crashes giving me the following error message: >>>> >>>> I/O : uncollated >>>> terminate called after throwing an instance of 'std::bad_alloc' >>>> what(): std::bad_alloc >>>> Qt has caught an exception thrown from an event handler. Throwing >>>> exceptions from an event handler is not supported in Qt. You must >>>> reimplement QApplication::notify() and catch all exceptions there. >>>> >>>> My OS is Ubuntu 16.04, freshly installed. I was getting the same error >>>> with Ubuntu 17.10 which I had installed until last night. >>>> >>>> I am looking for info about "reimplementing QApplication" with no luck. >>>> >>>> Any suggestions, please? >>>> Carlos >>>> >>>> _______________________________________________ >>>> Powered by www.kitware.com >>>> >>>> Visit other Kitware open-source projects at >>>> http://www.kitware.com/opensource/opensource.html >>>> >>>> Please keep messages on-topic and check the ParaView Wiki at: >>>> http://paraview.org/Wiki/ParaView >>>> >>>> Search the list archives at: http://markmail.org/search/?q=ParaView >>>> >>>> Follow this link to subscribe/unsubscribe: >>>> https://public.kitware.com/mailman/listinfo/paraview >>>> >>>> >>> >> >> _______________________________________________ >> Powered by www.kitware.com >> >> Visit other Kitware open-source projects at >> http://www.kitware.com/opensource/opensource.html >> >> Please keep messages on-topic and check the ParaView Wiki at: >> http://paraview.org/Wiki/ParaView >> >> Search the list archives at: http://markmail.org/search/?q=ParaView >> >> Follow this link to subscribe/unsubscribe: >> https://public.kitware.com/mailman/listinfo/paraview >> >> >
_______________________________________________ Powered by www.kitware.com Visit other Kitware open-source projects at http://www.kitware.com/opensource/opensource.html Please keep messages on-topic and check the ParaView Wiki at: http://paraview.org/Wiki/ParaView Search the list archives at: http://markmail.org/search/?q=ParaView Follow this link to subscribe/unsubscribe: https://public.kitware.com/mailman/listinfo/paraview