Hello once again Armando,
The RCA's, will go to your mixer.
The 1-8th inch plug, will go to the line in jack of your sound card.
But like I said, you have to have that cable.
It is really called, an adapter cable.
Because, it has the RCA plugs at one end, and the 1-8th inch plug at the
other end.
Most sound cards, only have 1-8th inch jacks for everything.
If your sound card is made like that, then you will need this adapter in
order to hook your mixer up to it.
Again, I hope this helps.
My best regards.
John.
----- Original Message -----
From: "Armando Maldonado" <armando_maldon...@digitalpath.net>
To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
Sent: Thursday, March 18, 2010 3:17 PM
Subject: Re: mixer and goldwave
Ok I have that specific cale, where do I plub the rca jacks in?
----- Original Message -----
From: "DJ DOCTOR P" <djdoct...@att.net>
To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
Sent: Thursday, March 18, 2010 12:09 PM
Subject: Re: mixer and goldwave
Hello,
If your sound card has a line in jack, you should plug your mixer in to
that.
But you will need a cable that has the RCA plugs on one end, and a 1-8th
inch many plug on the other end.
You can pick those up at RadioShack at about $6.
Hope this helps.
My best regards.
John.
----- Original Message -----
From: "Armando Maldonado" <armando_maldon...@digitalpath.net>
To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
Sent: Thursday, March 18, 2010 1:26 PM
Subject: mixer and goldwave
Hello,
I'm currently using a newmark mixer and am wanting to use the mixer's
mic to record from my pc using goldwave. Does anyone know in which jack
I need to plug in my RCA cables from my newmark mixer onto my pc?
Thanks.
aRmando
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org
