Gordon take a look at the beyer dt 290 broadcast headset. It's $239 from 
http://www.bswusa.com. It's dynamic so it doesnt need phantom power. 


On Wed, 6 Jul 2011 02:55:30 +0100, G. McFarlane wrote:


>Thanks Tim. You're right - I've just heard from Sennheiser. It's a shame - 
>they're great on the computer and with my voice recorder etc. Sennheiser 
>have recommended the HMD 280 dnamic mike or   HME 26 + cableX3k1-p48 
>(phantom powered), both quite expensive. Do you know either of them or any 
>other which will give broadcast or near broadcast quality for radio work 
>using a mixer?
>Happy to hear from anyone on this.
>Thanks again.
>Gordon
>
>-----Original Message----- 
>From: tim cumings
>Sent: Tuesday, July 05, 2011 3:00 PM
>To: PC Audio Discussion List
>Subject: Re: Sennheiser PC 160 Microphone headset
>
>They won't work directly into your mixer. They're designed to plug either 
>into a recorder or
>directly into a computer sound card. On Tue, 5 Jul 2011 02:59:16 +0100, G. 
>McFarlane
>wrote:
>
>
>>Hi
>>I recently purchased  a pair of these Sennheisser PC160 microphone headsets
>>when I heard a podcast on them from someone I think on this list. They 
>>sound
>>great when I plug them into my Olympus DM5 and the mike works well. However
>>when I plug the mike into my mixer I get absolutely nothing. I have 
>>converters
>>from 3.5 to the quarto jack, this does not work either. As they’re 
>>going 
>>into
>>the line in socket, I then tried an industry standard mike preamp, still
>>nothing, just hiss. The signal isn’t getting through although adding 
>>my 
>>Dm5
>>into the mix by plugging the mike into it first andd then routing it 
>>through
>>the mike preamp into the mixer and it does work.
>>Ideally I wish to use both headset mikes to record interviews through my 
>>mixer
>>to the computer. I should also say I’ve tried a number of converters 
>>from 
>>3.5
>>to quarto jack, mono and stereo.
>>Has anyone any suggestions as to how I can get a signal into my mixer. 
>>Perhaps
>>you know of a particular converter/adaptor which will allow the mike’s 
>>great
>>signal to hit the mixer.
>>Thanks.
>>Gordon McFarlane
>>To unsubscribe from this list, send a blank email to:
>>pc-audio-unsubscr...@pc-audio.org
>
>
>
>
>
>
>To unsubscribe from this list, send a blank email to:
>pc-audio-unsubscr...@pc-audio.org 
>
>
>To unsubscribe from this list, send a blank email to:
>pc-audio-unsubscr...@pc-audio.org
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Reply via email to