One important thing you haven't mentioned, is your cable from your cassette 
deck a stereo cable?
***
character is found in how you treat people who can't do anything for you.

web page
http://www.wrighthere.net

----- Original Message ----- 
From: "Adrian Spratt" <[email protected]>
To: "'PC Audio Discussion List'" <[email protected]>
Sent: Friday, December 07, 2012 3:12 PM
Subject: GoldWave stereo


Hi. I am unable to transfer a stereo recording in stereo to my computer with
GoldWave. Here's what I've achieved so far and where I'm stuck.

1. I determined that the microphone jack on my Dell Dimension 4700 is mono
and that in order to record in stereo, I need to use the line-in jack.

2. Activating the line-in jack on my XP was an adventure, but between sounds
and Audio in the control panel and Entertainment in Accessories, I got it
unmuted and the volume raised.

3. Now I can transfer a recording from my cassette player, but it is still
in mono, with a bias toward the left speaker. I've confirmed with headphones
that the cassette was recorded is in good, balanced stereo.

4. I thought I might have found the solution in GoldWave at something called
"Stereo Mixer" in, I believe, configuration. this item is set at 60,
whatever that means, and it was unchecked. However, I checked it. The next
recording stayed mono.

5. I went to the GoldWave manual to read about "stereo mix" and found only
one short paragraph, which reads as follows:

Some devices, such as "Stereo Mix" or "What You Hear" are disabled in
Windows by default and have to be enabled manually. Choose the Configure
button, select the Recording tab, right-click anywhere in the list and
select Show Disabled Devices, then right-click on the device in the list and
choose Enable.

This sounds simple enough, but I'm unable to get to this area or, if I've
succeeded, right-clicking does nothing.

Can anyone pull me out of this purgatory?

Thanks.
To unsubscribe from this list, send a blank email to:
[email protected]


To unsubscribe from this list, send a blank email to:
[email protected]

Reply via email to