I would try not using the mic stand that comes with the mic. Use a boom
stand and mount the mic that way so that it's not on the desk at all.
----- Original Message -----
From: "angel.adorno1" <angel.ador...@verizon.net>
To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
Sent: Friday, February 14, 2014 6:30 AM
Subject: Re: need helping with humming on blue yeti pro.
no not electrical humming. I pick up the mic off the desk and the sound
goes away. my mic is a usb mic does that need to be grounded as well.
----- Original Message -----
From: "Brian Olesen" <br...@blindkom.dk>
To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
Sent: Friday, February 14, 2014 5:33 AM
Subject: Re: need helping with humming on blue yeti pro.
hi,
and are you 100 % sure it's not electrical humming?
you can check that by touching it while you record. if it stops then it's
a grounding problem.
Brian
-----Oprindelig meddelelse-----
From: angel.adorno1
Sent: Thursday, February 13, 2014 11:20 PM
To: PC Audio Discussion List
Subject: Re: need helping with humming on blue yeti pro.
I am using a fome mouse pad I still can here it.
----- Original Message -----
From: "Pat Seed" <patat...@tbaytel.net>
To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
Sent: Thursday, February 13, 2014 3:51 PM
Subject: Re: need helping with humming on blue yeti pro.
Hi,
Putting the Yetti on a pad of foam rubber is the best. Most times, even
a foam mouse pad will work.
Blessings and All the Very Best,
Pat
----- Original Message -----
From: "André van Deventer" <andred...@webafrica.org.za>
To: "'PC Audio Discussion List'" <pc-audio@pc-audio.org>
Sent: Thursday, February 13, 2014 3:36 PM
Subject: RE: need helping with humming on blue yeti pro.
What I have done to get rid of this humming is to place the mic stand
on a
thick pad of foam rubber. This works for me. This is a very
sensitive
mic!
Andre
-----Original Message-----
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of
angel.adorno1
Sent: 13 February 2014 10:24 PM
To: PC Audio Discussion List
Subject: need helping with humming on blue yeti pro.
hello I am a blind pc user, I own a blue yetti pro, I use it on the
stand
that it came with, and it is a very good mic. my problem is that I have
a
tower under my pc, with a five inch fan that is on top of the pc and it
blows air up. when my mic is on I hear the fan of the tower, but that
is not
the problem.
like I said because my tower is under my desk and the mic sits on top
of the
desk I hear a humming coming from my desk, I think it's the fan that is
blowing under the desk. now when I take the mic off the desk the
humming
goes away, so I think that the humming is coming from air hitting
bottom of
desk. now I bought a shock mount, but the hummming is still there with
the
shock mount. and again once I lift the mic off the desk the humming
goes
away.
is there anything I could do for this. some one suggested a boom arm,
but if
I get one will I have to take the mic off the stand to attach it to
boom
arm. any suggestions will be appreciated.
thanks so much.
