hi ok jo look forward to hearing from you
from the ross meister
www.laserhothits.co.uk
----- Original Message -----
From: "Joe Paton" <j...@vi-ability.demon.co.uk>
To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
Sent: Thursday, June 04, 2015 8:27 PM
Subject: Re: another issue has come up
ok stuart,
I will write you tomorrow.
Joe
On Thu, 4 Jun 2015 16:49:12 +0100
stewartross <stewartr...@sky.com> wrote:
hi jo i still haven't got the problem with the encoders sorted
stew
from the ross meister
www.laserhothits.co.uk
----- Original Message ----- From: "Joe Paton"
<j...@vi-ability.demon.co.uk>
To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
Sent: Saturday, May 30, 2015 3:13 PM
Subject: Re: another issue has come up
stuart, Have you got this sorted now?
Joe
On Wed, 27 May 2015 22:38:43 +0100
stewartross <stewartr...@sky.com> wrote:
hi jo just saw your posting re sam encoders
ok hears the problem i have
i am using sam broadcaster
i am only using the encoder part of it to stream
ok i am trying to set a new encoder up and the most that i can get to is
> wen it says choose format button press the space bar, wen i go to do
this > pressing the space bar nothing happens
so i can't choose the format or the sample or bit rate what can i do?
using jaws 14 windows 7 64 bit
from stew
from the ross meister
www.laserhothits.co.uk
----- Original Message ----- From: "Joe Paton" >
<j...@vi-ability.demon.co.uk>
To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
Sent: Wednesday, May 27, 2015 9:19 PM
Subject: Re: another issue has come up
Mike,
here's what I do.
Start the sam encoders.
press the application key, and select "new ins."
If you have an encoder set already, and focus is on that one, select >
>> config.
If you are on a new instance, then as you have done, select mp3 and mp3
> >> pro.
Then after hitting the ok button, You should be in a converter window,
> >> which is one of three.the other tabs are server details and stream
> >> archive.
If you don't see these tab controls, then something may be wrong with
the
installation.
Did you enter the authorization key or whatever they call it in sam?
good luck
Joe
On Wed, 27 May 2015 12:40:49 -0400
Mike Bernard <mbern6...@aol.com> wrote:
Hello again everyone,
I finally got Winamp 5.666 back up and running again, however, now I'm
in
the process of trying to setup my encoders in sam. The only problem is,
> >> you
know how when you select the new ins options from the applications menu
> >> and
choose mp3 and mp3 pro? This is where I'm having trouble. There's
usually >> > a
focuss issue with that window, and so what I do is press spacebar on mp3
>> > and
mp3 pro, and then using my numpad arrows, I press numpad 3 to move the
virtual mouse down to the bottom right, then press insert numpad 7 until
>> I
get to the ok an cancel buttons, and left-click on ok, which normally >
>> takes
me into the next window, where I can select options for the server
information, converter, streaming bit rate ETC. However, for some
reason, >> > I
can't seem to get to the ok or cancel buttons. I know that they are > >>
present
on the screen, but I can seem to get to them accessibly. What can I do?
Mike
Rochester, NY.
P.S. other than this minor issue with sam encoder, (at least I hope it's
minor), winamp is working fine otherwise.
-- > Joe Paton <j...@vi-ability.demon.co.uk>
-- > Joe Paton <j...@vi-ability.demon.co.uk>
--
Joe Paton <j...@vi-ability.demon.co.uk>
