Hi all,

the description of the available spectrum in draft-lee-pce-flexible-grid should in my opinion be consistent with the available spectrum
description in draft-ietf-ccamp-flexible-grid-ospf-ext. Please note that the available spectrum is advertised in terms of available central
frequencies!

A central frequency f_c is available only if the spectrum is available in the interval [f_c - f_minSlotWidth/2, fc + f_minSlotWidth/2]

If the flexgrid granularity is 6.25GHz and the minSlotWidth is 12.5GHz this means leads to: [f_c - 6.25GHz, f_c + 6.25 GHz]

This is different from advertising spectrum slots like for example [f_c_n-1, fc_n].

Please note that a modulated optical carrier occupies spectrum symmetrical around the central frequency.


Thanks,
Dieter


On 20.07.2017 11:04, Zhenghaomian wrote:
Hi, Julien and Young, 

I fully agree on that we should try our best on reusing the existing object/TLVs. FYI, when we are working on GMPLS extensions from fixed-grid (WSON) to flexi-grid, we have some TLVs in parallel (switching types) for fixed/flexi-grid. 

I assume this is exactly what we are doing in this draft, the split occurs when it is difficult to use existing TLV to represent the new features. In some cases, the meaning of flags/TLVs need to be changed to support different scenarios, so the similarity on object does not necessarily mean the equivalent on functionality. 

My 2 cents, 
Haomian

-----邮件原件-----
发件人: Pce [mailto:pce-boun...@ietf.org] 代表 Leeyoung
发送时间: 2017年7月20日 16:41
收件人: Julien Meuric; pce@ietf.org; draft-lee-pce-flexible-g...@ietf.org
主题: Re: [Pce] My Comment on draft-lee-pce-flexible-grid

Hi Julien,

I agree. A New flag on the object header (WA Object, I assume that is what you are pointing to) where we have a flag to indicate if this is fixed (WSON) or flexi-grid is reasonable instead of creating a new object for a new Spectrum Assignment Object.

TLVs require a bit different encoding due to the nature of additional parameters for flexi-grid. So strict re-use of WSON TLV may not be sufficient for some cases in flexi-grid. 

Best regards,
Young

-----Original Message-----
From: Julien Meuric [mailto:julien.meu...@orange.com] 
Sent: Thursday, July 20, 2017 10:28 AM
To: pce@ietf.org; draft-lee-pce-flexible-g...@ietf.org
Subject: My Comment on draft-lee-pce-flexible-grid

Hi,

The discussion during the meeting suggests that I need to clarify my comment about draft-lee-pce-flexible-grid.

This I-D is very similar to draft-ietf-pce-wson-rwa-ext, which addresses the exact same problem over a slightly different WDM label space (running a side-by-side diff between them appears to be very practical).
This new I-D requests the creation of one object and 3 TLVs, which are identical to the ones created in the WSON.
As a result, I believe the latter should be reused as a starting popint.
Covering the flexi-grid case may just need to allocate new flag in the object header to identify the WDM type we're dealing with, and document the flexi-grid-specific assumptions (if any).

Thanks,

Julien

_______________________________________________
Pce mailing list
Pce@ietf.org
https://www.ietf.org/mailman/listinfo/pce
_______________________________________________
Pce mailing list
Pce@ietf.org
https://www.ietf.org/mailman/listinfo/pce

--

Dieter Beller
Open Agent & Routing Project Manager
IP/Optical Networks, Optics, Nokia

t: +49 711 821 43125 | m : +49 175 7266874 | OnNet: 259 43125
dieter.bel...@nokia.com

Alcatel-Lucent Deutschland AG | Lorenzstr. 10 | 70435 Stuttgart
Sitz der Gesellschaft | Domicile of the Company: Stuttgart · Amtsgericht Stuttgart HRB 4026
Vorsitzender des Aufsichtsrates | Chairman of the Supervisory Board: Prof. J. Menno Harms
Vorstand | Board of Management: Wilhelm Dresselhaus (Vorsitzender | Chairman) · Ralf Niederberger

This e-mail and its attachments, if any, may contain confidential information.
If you have received this e-mail in error, please notify us and delete or destroy the e-mail and its attachments, if any, immediately.
If you have received this e-mail in error, you must not forward or make use of the e-mail and its attachments, if any.
_______________________________________________
Pce mailing list
Pce@ietf.org
https://www.ietf.org/mailman/listinfo/pce

Reply via email to