Thanks Rakesh,
It seems to me that associating an SR path in one direction with an RSVP-TE path in the other direction is *possible* but seems unlikely in the extreme. I would not want to take an action that made it impossible to add this feature should someone come up with a pressing desire, but it looks like an odd thing to specifically engineer into the solution at this stage. Of course, a way to test this would be to send an email to SPRING and TEAS to ask this specific question. After all, the purpose of PCE is to serve as a tool to facilitate what the people in those two WGs are trying to do. The two questions raised in the earlier threads are related to this, but do not quite cancel each other out. 1. Do we need two different association types, one for RSVP-TE and one for SR? 2. Is it an error if there is an attempt to associate an LSP with an SR path? Best, Adrian From: Rakesh Gandhi <rgandhi.i...@gmail.com> Sent: 01 February 2020 16:46 To: Stone, Andrew (Nokia - CA/Ottawa) <andrew.st...@nokia.com> Cc: Dhruv Dhody <dhruv.i...@gmail.com>; pce@ietf.org; Farrel Adrian <adr...@olddog.co.uk> Subject: Re: [Pce] Adoption of draft-li-pce-sr-bidir-path-06? Thanks Andrew. Adding Adrian who had a similar comment in a different thread. Hi Dhruv, Cheng, For all other association types (VN, Policy, diversity, etc.), we do not have different types defined for RSVP and SR. If we use the same association type and limit the LSPs to be the same type (PST) in the bidirectional LSP, then may be implementation can handle the logic for the PST type accordingly? As IANA allocation has not been done, current implementation can be adjusted? Thanks, Rakesh On Thu, Jan 23, 2020 at 9:40 PM Stone, Andrew (Nokia - CA/Ottawa) <andrew.st...@nokia.com <mailto:andrew.st...@nokia.com> > wrote: Hi Rakesh, Thanks for the reply and input. I initially had the same thought as well: "just migrate both sides at the same time". Only concern is of course some migration strategies choose to migrate regionally or node-by-node, rather than tunnel pairs. In this case, definitely will have to do both sides at the same time. It may not actually be that troublesome, since I'm not an operator just going by what I've heard from colleagues and theorizing the situation. Cheers Andrew _____ From: Rakesh Gandhi <rgandhi.i...@gmail.com <mailto:rgandhi.i...@gmail.com> > Sent: Thursday, January 23, 2020 11:12 AM To: Stone, Andrew (Nokia - CA/Ottawa) <andrew.st...@nokia.com <mailto:andrew.st...@nokia.com> > Cc: Dhruv Dhody <dhruv.i...@gmail.com <mailto:dhruv.i...@gmail.com> >; pce@ietf.org <mailto:pce@ietf.org> <pce@ietf.org <mailto:pce@ietf.org> > Subject: Re: [Pce] Adoption of draft-li-pce-sr-bidir-path-06? Hi Andrew, Many thanks for your review comments. Please see below with <RG2>.. On Wed, Jan 22, 2020 at 10:57 PM Stone, Andrew (Nokia - CA/Ottawa) <andrew.st...@nokia.com <mailto:andrew.st...@nokia.com> > wrote: Hi Dhruv, Thanks again for the speedy reply. Comments below under <andrew2> Cheers Andrew On 2020-01-22, 8:01 AM, "Dhruv Dhody" <dhruv.i...@gmail.com <mailto:dhruv.i...@gmail.com> > wrote: Hi Andrew, On Wed, Jan 22, 2020 at 12:06 AM Stone, Andrew (Nokia - CA/Ottawa) <andrew.st...@nokia.com <mailto:andrew.st...@nokia.com> > wrote: > > Hi Dhruv, > > Thanks for the reply and feedback. > > Could an implementation of PCE not simply just return error during that situation? In diversity if too many LSPs grouped together and PCE computationally can't support it, it returns a PCERR. So I would reason that if bidirectionally associated and notify PCCs is necessary, but was configured between SR and RSVP, that's also an error due to the (current) unsupported feature set. I see this as trying to protect against day-0 misconfig by changing the wire encoding within the protocol (which I'm not necessarily against..). While I have doubt if it's a valid use case or requirement in a production deployment, and it may have been acknowledged before, but this essentially blocks associating SR LSP with RSVP LSP bidirectionally for PCE to compute. > > Since the overall workflow doesn't change by this new type def, and if SR<->RSVP associated is not reasonable requirement, and If consensus has already been reached on this, and implementation already exist, I'm okay with parking this topic. > The SR draft does expect all LSPs to be SR for the new association type and thus easier to handle. If you use a common association type, the behavior would be dependent on the PST for the first LSP that is added to the association. We could end up in a situation where Peer 1 would add LSP 1 (SR) first and reject LSP 2 (RSVP-TE) and peer 2 would add LSP 2 (RSVP-TE) first and reject LSP 1 (SR). Also there might be a use for this mixed cases in future, which would require different processing to be defined. <Andrew2> I will ponder on this some more. I'm undecided yet if the reasons to protect config/behaviour mismatch, outweigh just having one type encoding and defining the individual behaviours separately, which could also be up to the local policy defined by the PCE implementation. It could be possible that a network has nodes currently running RSVP, with plans to migrate to SR-TE which could take a very long time due to the size of the network. The software running on the nodes may be upgraded, of which those PCCs may have an implementation of these bidirectional drafts, but have still not yet migrated to SR-TE. An operator may wish to leverage PCE feature sets on newer created services sooner than later (for example, bidirectional capability) so they begin using bidirectional RSVP to have symmetric paths for SLA reasons and aid in avoiding manual traffic engineering. Over time, as the network is migrated to SR-TE tunnels you have some nodes using SR-TE tunnels and the reverse nodes still operating with RSVP. From an operator p.o.v the bidirectional notification behaviour here wouldn't matter, they just want the LSPs to take the same resources symmetrically. The feature set on PCE, as per the current draft wording and types will be broken. </end andrew2> <RG2> I would think that the migration would happen for the whole bidirectional LSP on both endpoints at the same time. This is because, all nodes would have migrated to be SR aware in order for the forward path to be SR path (I am thinking co-routed). In addition, the complexity to associate the SR and RSVP paths into a bidirectional path is not small, given that SR path ingress node would know the reverse path via signaling whereas RSVP path ingress node would know via PCEP. Which also means, one would need to upgrade the RSVP ingress node anyways to learn the reverse SR path. Traffic steering and other functions for the RSVP path and SR path in the reverse direction (and vice versa) may bring additional work. <RG2> Having said that, the same association group type can be used for SR and RSVP paths (e.g. both are the same PST) in theory, but given the implementation status in the draft, I will let respective co-authors comment. > Still hoping for feedback regarding my comments on section 5. I see that as being more significant, since it influences the workflow and at the moment I don't see the dependency on draft-li-pce-controlled-id-space as necessary to achieve notifying PCCs of reverse paths. > And I was hoping that authors would take a bite :) From what I understood PLSP-ID remains a PCC allocated ID. The point that section 5 is making is that the same LSP would be identified by two PLSP-IDs, one allocated by Ingress and another by Egress PCCs. There is no proposal for PCE-controlled PLSP-ID. So PCE-init + R bit is enough (as you state) and I am in full agreement with you that figures with PLSP-ID could be useful. <Andrew2> Thanks for the comments and agreement. draft-li-pce-sr-bidir-path-06 section 5.1, says "PCE needs to allocate a PLSP-ID". Perhaps it was just a typo and should have said PCC. ===current Since the PLSP-ID space is independent at each PCC, the PLSP-ID allocated by the egress PCC can not be used for the LSP at the ingress PCC (PLSP-ID conflict may occur). Hence, the PCE needs to allocate a PLSP-ID for LSP2 from the ingress PCC's PLSP-ID space , say 101. Similarly for LSP1, it has PLSP-ID 100 at the ingress, and may have say PLSP-ID 201 at the egress node. =====end current May I propose the following text (or something like it) instead: ===new proposal Since the PLSP-ID space is independent at each PCC, the PLSP-ID allocated by the egress PCC cannot be used for the LSP at the ingress PCC (PLSP-ID conflict may occur). As per normal PCE-INIT operations, PCC assigns the PLSP-IDs for local LSPs. Hence, when the PCE notifies an ingress PCC of the reverse egress LSP, it does so using PCE-INIT operations and sets PLSP-ID to zero and sets the R bit in the association object to indicate that this PCE-INIT LSP is a reverse LSP. The PCC upon receiving the PCE-INIT MUST locally assign a PLSP-ID and it MUST issue a PCREPORT to PCE for this LSP containing the new PLSP-ID. This LSP MUST NOT be instantiated on the PCC. For example, ingress PCC1 way may report to PCE an LSP with PLSP-ID 100. Egress PCC2 may report to PCE an LSP with PLSP-ID 200. Both of these LSPs are bi-directional associated. When PCE notifies PCC1 of the PCC2 LSP, it does so by sending a PCE-INIT to PCC1 with PLSP-ID set to zero and R bit set. PCC1 upon reception of this generates a PLSP-ID (example PLSP-ID 300) and issues a PCREPORT to PCE. =====end new proposal <RG2> Looks good to me. Thanks for the text. <RG2> Many thanks Dhruv for the inputs. Thanks, Rakesh </end andrew2>
_______________________________________________ Pce mailing list Pce@ietf.org https://www.ietf.org/mailman/listinfo/pce