On Mar 8, 2006, at 9:29 AM, [EMAIL PROTECTED] wrote:
Thanks,
I forget also to ask you how in a PCReq the PCE can distinguish
between the two BANDWIDTH Objects which one represent the existing
LSP and the other one the requested bandwidth ?
They have different Object-Type:
Two Object-Type are defined for the BANDWIDTH object:
o Requested bandwidth: BANDWIDTH Object-Type is to be assigned by
IANA (recommended value=1)
o Bandwidth of an existing TE LSP for which a reoptimization is
performed. BANDWIDTH Object-Type is to be assigned by IANA
(recommended value=2)
JP.
JP Vasseur wrote:
Hi,
On Mar 8, 2006, at 8:51 AM, [EMAIL PROTECTED] wrote:
Dear authors,
I noticed in part 7.3.2. "Handling of the RP object", that the
line "If the C bit of the RP message carried within a PCReq
message is set..." is confusing even if I think the C bit refer
to the C bit of the optional METRIC object. Maybe a simple
modification of that line can enhance the comprehension.
Thanks Richard, this will be clarified in the next revision.
JP.
Regards,
Richard
_______________________________________________
Pce mailing list
[email protected]
https://www1.ietf.org/mailman/listinfo/pce
--
Richard Douville
Alcatel Research & Innovation Center
System and Architecture of Transport Networks, SART
Route de Nozay
F-91460 Marcoussis, France.
Phone : 33 1.69.63.44.31
Fax : 33 1.69.63.18.65
Email : [EMAIL PROTECTED]
_______________________________________________
Pce mailing list
[email protected]
https://www1.ietf.org/mailman/listinfo/pce
