David, You didn't say how much of the 7300 VRAM you installed in the 7500. The 7200 will work with no VRAM installed because it has 1MB soldered to the motherboard and 3 slots for more. The 7500 has none soldered and 4 slots for more VRAM DIMMs. The 7500 requires either 2MB or 4MB of VRAM. It won't work with 1MB and it won't work with 3MB. Stop me if you already know this. Good Luck. Joe > From: "David W. Owens" <[EMAIL PROTECTED]> > I stripped the ram, vram, and drives from a > 7200, installed them in the 7500. Nothin'. I > moved all the ram, vram and drives back to the 7200, and it worked fine.
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
