On 11/6/02 10:01 pm, "Kimberly Leslie" <[EMAIL PROTECTED]> wrote:
> Hi > > I am currently using a 7300 with a G3 upgrade card in it - I'm not exactly > sure which one - but it runs at 288mhz according the the apple system > profiler. I just got a 7500 mainboard with the rca jacks included. > > What I was wonders was this... > > Would it make any difference in speed to move my G3 card to the 7500 so I > could make use the the rca jacks? And could a rca video out jack be added > to this piece? > > I know that Guru 2.9 says that the 7300 is rated at 45mhz and the 7500 is > rated at 50mhz - which to me is not that much of a difference. But since > the 7300 had a 604e to start with, is there any benefits to keeping > everything on the 7300? > > I have several 7200's laying around so finding compatible power supply and > box for the 7500 is not a problem. > > Thanx > kim > The 7300 and 7500 would both run at the same bus speed if the G3 upgrade card was moved over. The bus speed is set by the processor card. Steve Bell -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
