Have you installed the XLR8 control panel?
Mark Rath wrote:
> Ok I have had a couple suggestions on the ZIF carrier problem I am having
> but I didnt explain the problem enough I guess - so here is more detail. I
> have a XLR8 MACh G3 ZIF Carrier Card, and a 233 ZIF. I have set the switches
> to 6,7,8,9 and can't find (or figure out where) the jumpers are they refer
> to on their web site. The card is going in a 7500 power mac, when the card
> goes in the machine powers up and the drive whir's but the machine will not
> give the start up tone nor will it boot - at all. Pull the ZIF Carrier card,
> put the 604e/200 card back in and all is fine. The XLR8 web page says 60
> nanosecond RAM, how do I know that? Could that be my problem?
> thanks
> Mark Rath, LSW, Director
> PO Box 14484
> Grand Forks, ND 58208
> --
--
PCI-PowerMacs is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives |
-- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml>
--> AOL users, remove "mailto:";
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
