> -----Original Message----- > From: PCI PowerMacs [mailto:[EMAIL PROTECTED] Behalf > Of Franz > Sent: Thursday, April 03, 2003 4:09 PM > To: PCI PowerMacs > Subject: USB printing problems > > > Hi all, > > Have a 6200 with a 6500/250 motherboard, got today from a seller on LEM > swaplist a low rise 1 slot PCI adapter and a 4 slot USB card, installed > all drivers, extensions on, installed the driver for the printer. In > Apple System profiler I can see the USB device and in all 4 slots the > printer, in the chooser also the printer. When i try to print I get the > message that there is not enough memory for the printer, it is set to > minimum 250k and preferable 350k. I did go up to 5000k and still tI get > the same message. > What could be the problem? > > Franz Bangkok > Most (if not all) 4port USB cards are incompatible with anything prior to a beige G3, change it for a 2port card and all should be fine. Depending on the card, you may be able to use one of the ports, but not the other 3. Ben.
-- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
