On 07-02-2006 00:29, YewTreeHouse at OneTel, [EMAIL PROTECTED], wrote: > I recently fitted a G3/400 into my 9600 now I have a spare 604e/350 daughter > board. What chance this will work in my 7300/200 to give a speed boost? > Both machines are 50MHZ bus speed.
Sorry! But the 604ev Mach V out of the PM 9600/350 will in no ways work in any 7300 ae. The only other Kansas will be the 8600. IMHOAE: You better can put that G3/400 in the 7300/200 and leave the 9600/350 as in original state. Several reasons: 1) The 9600/8600 Mach V's are well-known picky with upgrades. 2) The 7300's are not! (Beware event. req. jumper-settings!). 3) Upgrading the 9600 leaves you with a (picky?) G3/400 AND a 7300/200 (for the 604ev/350 is not usable!). 4) Upgrading the 7300 leaves you with a stable G3/400 AND a 9600/350. Which is a much better and stable couple, I would say. Just the 2 €-cents opinion of an old? (62) Maccer and still maintaining ae(haha) around 80 OldWorld Mac's (PCI + Beige) + around 25 Older/OldestWorld Mac's (Nubus and before + even 1 Lisa!). A tip to learn more about these: Goto "PCI PowerMacs Archieves" and look for postings from "[EMAIL PROTECTED]". He is/was? a real Practical Encyclopedia OnList. I'm really missing his postings last months! HTH, Jo Hissel -- PCI-PowerMacs is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Sonnet & PowerLogix Upgrades - start at $169 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> PCI-PowerMacs list info: <http://lowendmac.com/lists/pci-powermacs.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[email protected]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive:<http://www.mail-archive.com/pci-powermacs%40mail.maclaunch.com/> iPod Accessories for Less at 1-800-iPOD.COM Fast Delivery, Low Price, Good Deal www.1800ipod.com
