Gerald,
what I have done for the time being, is set the security to minimum, and
after logging on raising it back to high.
I will try the method you suggest thank you. I am a bit wary because this is
a new area that I am delving into.
Meir
At 08:47 AM 5/3/01 +0200, Meir Cahal wrote the following:
>I installed Zone Alarm but after the installation, I was not able to
>connect. Could somebody please explain why.
Does your provider use DHCP?
If so, there are two solutions. One is to set Internet Security to Medium.
This allows the DHCP broadcasts, but the firewall still blocks NetBIOS
access to your computer from the Internet. In addition, you remain protected
by ZoneAlarm. Only those applications that you approve can connect to, or
accept connections from, the Internet.
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
