Bram,
What you need for your disks to work together is "Raid1" this will
mirror image the disks. and if one falls down the other one will take
over.
As for your 10 lines, you need a digi board and a RAS, this can be
software sometimes hardware, then you can upload or download, till your
hearts content
Meir
System Administrator
Steimatzky Group Ltd
-----Original Message-----
From: Bram [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, August 21, 2001 5:59 PM
To: PCWorks
Subject: PCWorks: HardDisks
Two questions .
What do I need to run 2 hard disks together so one is a mirror image of
the
other. i.e. so that if one fails the second one will just take over. Any
suggestions where I can read up on this?
Second question. If I have a telephone switchbaord with , say 10 lines,
can I
connect several lines at once to one computer, and thus send out several
downloads( or is it uploads) at the same time.
All advice appreciated.
Thanks
Bram
AngloComp
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
