>From the compaq site http://www.compaq.com/support
Q. How do I access the CMOS setup utility?
A. For older product models, like the Deskpro 286 or 386, place the
Diagnostics disk in the disk drive, reboot your
system, and choose computer setup from the menu.
For newer products like the ProLinea, Deskpro, Deskpro XL, Deskpro XE,
or Presario, press the F10 key while the cursor
is in the upper right hand corner of the screen. This happens just after
the 2 beeps when booting.
Keith Thompsn
Rogergri wrote:
>
> I need instructions on how to get into the CMOS of a Compaq computer.
> TIA
> Roger Griffin
--
Keith Thompson, Worthington, OH
Home Web Page: http://freepages.family.rootsweb.com/~kthompson/
Genealogy Web Page: http://freepages.genealogy.rootsweb.com/~kthompson
I Didn't Climb to the Top of the Food Chain to Be a Vegetarian
============= PCWorks Mailing List =================
Don't see your post? Check our posting guidelines &
make sure you've followed proper posting procedures,
http://pcworkers.com/rules.htm
Contact list owner <[EMAIL PROTECTED]>
Unsubscribing and other changes: http://pcworkers.com
=====================================================
