If your running XP right click on the desktop, then click properties, then click screen savers, then click advanced, then open the APM tab if you have it and put a check in Use APM. I just did that on a friends machine and it worked great after that. Rocky
On 5 Jun 2002 at 20:50, Ben Moore wrote: From: "Ben Moore" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Subject: Re: PCWorks: power doent turn off after HD change Date sent: Wed, 5 Jun 2002 20:50:24 -0400 Send reply to: [EMAIL PROTECTED] > You don't say which operating system you have. Win98? Try going to > the control panel/ power tab and see if you have an enable APCI ? > setting. I putting ? marks in here because I don't have a Win98 > system any more and I'm doing this from a very poor memory. > > Ben Moore > > > ----- Original Message ----- > From: "Electronics" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Wednesday, June 05, 2002 8:36 PM > Subject: PCWorks: power doent turn off after HD change > > > > after changing my hard drive now when I shut down it goes to the > > "its now safe to turn your computer off" screen instead of > > automatically shutting off..then I can push power button and turn > > off....anyone know how to fix? thanks for any help -Tony > > > > Electronics Inc > > 7027 Hwy 441 > > Dillard GA 30537 > > 706 746 3353 > > [EMAIL PROTECTED] Rocky Fithian If God doesn't seem near, who moved? To check my sites click the link below. http://web.sccoast.net/users/rockyfit/WebPageLinks.htm ============= PCWorks Mailing List ================= Don't see your post? Check our posting guidelines & make sure you've followed proper posting procedures, http://pcworkers.com/rules.htm Contact list owner <[EMAIL PROTECTED]> Unsubscribing and other changes: http://pcworkers.com =====================================================
